Filtered Results
Clear All
sychronized digital/analog output at a microsecond time scale on a PCI 6713 card

... scale on a PCI 6713 card sychronized digital/analog output ... scale on a PCI 6713 card AndyB Member ‎01-27-2003 08:31 ... scale on a PCI 6713 card Filipe A. Active Participant ‎01-28-2003 ...

https://forums.ni.com/t5/LabVIEW/sychronized-digital-analog-output-at-a-microsecond-time-scale-on/td-p/72698
configure SCB-68 in NI-DAQmx

... have a NI PCI-6713 and a SCB-68 connector block. Under ... Devices and PCI-6713 appears under each of them. But when ... of the PCI-6713, for the one under Traditional DAQ, ...

https://forums.ni.com/t5/Signal-Conditioning/configure-SCB-68-in-NI-DAQmx/td-p/2182450
exe file created in one pc is not running in other pc

... anther pc & pci-6713  board in both pc. i have created  task ... has same pci-6713 board.(dev4\a0).application.exe is running ... anther pc & pci-6713  board in both pc. i have created  task ...

https://forums.ni.com/t5/LabVIEW/exe-file-created-in-one-pc-is-not-running-in-other-pc/td-p/1806584
obtain 4 analogue output from 6713

... purchased a PCI 6713 analogue output card attached to  SCB-68. ... from my PCI 6713 card in order to control other equipment ...

https://forums.ni.com/t5/Multifunction-DAQ/obtain-4-analogue-output-from-6713/td-p/808250
Can i trigger analog card using RTSI line from digital card

... with a PCI-6713 and IMAQ1409 via RTSI lines and using ... PCI-DIO-32HS and PCI-6713 boards are able to send and receive ...

https://forums.ni.com/t5/Digital-I-O/Can-i-trigger-analog-card-using-RTSI-line-from-digital-card/td-p/71104
Digital WFM_OP?!?

... Ben, The PCI-6713 hardware does not support timed or buffered ... for the PCI-6713 are described in the NI-DAQ Help file ... with the PCI-6713. National Instruments DAQ boards have ...

https://forums.ni.com/t5/Multifunction-DAQ/Digital-WFM-OP/td-p/8695
Generate a delayed pulse with analog trigger

... using PCI-6713 Thanks!! 0 Kudos Message 1 of 2 (1,530 ... of the PCI-6713. Just make sure that the signal does ...

https://forums.ni.com/t5/LabVIEW/Generate-a-delayed-pulse-with-analog-trigger/td-p/31097
Can I retrigger a finite analog output without stopping and restarting the task?

... from a PCI-6713 card each time the card is triggered. ... let the PCI-6713 card re-trigger and output again without ...

https://forums.ni.com/t5/Multifunction-DAQ/Can-I-retrigger-a-finite-analog-output-without-stopping-and/td-p/743604
best AO device for continuous loop feedback

... purchased the PCI-6713 analog output card. I tested some Labview ... of the PCI-6713 card. My question is how can I use the PCI-6713 card to continuously generate for instance ...

https://forums.ni.com/t5/LabVIEW/best-AO-device-for-continuous-loop-feedback/td-p/606963
Question about waveform generation and oldDataStop

... using a PCI-6713 board to regenerate a waveform that ... configured the PCI-6713 to not allow the regeneration of old ... using a PCI-6713 board to regenerate a waveform that ...

https://forums.ni.com/t5/Multifunction-DAQ/Question-about-waveform-generation-and-oldDataStop/td-p/4287
Showing 91-100 of 210 results
10 of 21 pages