Filtered Results

You can select the path for the signal to pass through by enabling or disabling the digital filter using niFgen Configure Digital Filter, niFgen_EnableDigitalFilter, or niFgen_DisableDigitalFilter. By ...

The following processes outline the generation of analog waveforms with the PXIe-5433: The 16-bit digital waveform data from the Waveform Generation Engine is passed through fractional resampling and filtering. ...

You can select the path for the signal to pass through by enabling or disabling the digital filter using niFgen Configure Digital Filter, niFgen_EnableDigitalFilter, or niFgen_DisableDigitalFilter. By ...

These specifications apply to the one-channel and two-channel PXIe-5413. Definitions Warranted specifications describe the performance of a model under stated operating conditions and are covered by the ...

You can select the path for the signal to pass through by enabling or disabling the digital filter using niFgen Configure Digital Filter, niFgen_EnableDigitalFilter, or niFgen_DisableDigitalFilter. By ...

These specifications apply to the one-channel and two-channel PXIe-5433. Definitions Warranted specifications describe the performance of a model under stated operating conditions and are covered by the ...

The following processes outline the generation of analog waveforms with the PXIe-5413: The 16-bit digital waveform data from the Waveform Generation Engine is passed through fractional resampling and filtering. ...

The following processes outline the generation of analog waveforms with the PXIe-5423: The 16-bit digital waveform data from the Waveform Generation Engine is passed through fractional resampling and filtering. ...

You can synchronize the PXIe-5423 with other instruments using PXIe_Clk100 as the Reference Clock source and NI-TClk. Use the NI-FGEN Absolute Delay property or NIFGEN_ATTR_ABSOLUTE_DELAY attribute to ...

Onboard Memory Stores the waveform data and generation instructions that you load into the PXIe-5433. Waveform Generation Engine Retrieves the waveform data and instructions from the onboard memory and ...

Sample Clock (Internal) The Sample Clock signals when the DAC converts the digital waveform values to an analog voltage. The PXIe-5433 can derive a Sample Clock from its main internal timing source, the ...

PXIe, 80 MHz Bandwidth, 16-Bit PXI Waveform Generator 400 MS/s sampling rate with digital filter enabled 0.00775 V[pk-pk] to 12 V[pk-pk] output amplitude into a 50 Ω load 0 MHz to 80 MHz sine wave generation ...

NI recommends using the SCB-19 connector block to connect digital signals to the AUX 0 connector on the PXIe-5433 front panel. Refer to the following figure and table for information about the SCB-19 signals ...

Front Panel Refer to the following figure and tables for information about the one- and two-channel PXIe-5433 front panel connectors and LEDs. PXIe-5433 Signal Descriptions Signal Connector Type Access ...

You can synchronize the PXIe-5433 with other instruments using PXIe_Clk100 as the Reference Clock source and NI-TClk. Use the NI-FGEN Absolute Delay property or NIFGEN_ATTR_ABSOLUTE_DELAY attribute to ...

PXIe, 43 MHz Bandwidth, 16-Bit, Onboard Signal Processing PXI Waveform Generator 100 MS/s sampling rate, 400 MS/s with DAC interpolation 2 Vpk-pk output amplitude into a 50 Ω load 43 MHz sine wave generation ...

Refer to the following figure and tables for information about the PXIe-5442 front panel connectors and LEDs: PXIe-5442 Signal Descriptions Signal Connector Type Access Description CH 0 SMB Output Generates ...

PXIe, 145 MHz Bandwidth, 16-Bit, I/Q PXI Waveform Generator 98 dB close-in SFDR at 1 MHz 145 MHz analog bandwidth for 290 MHz bandwidth RF signals ±0.15 dB flatness to 120 MHz with digital flatness correction ...

Refer to the following figure and tables for information about the PXIe-5450 front panel connectors and LEDs: PXIe-5450 Signal Descriptions Signal Connector Type Access Description CLK IN SMA Input Accepts ...

PXIe, 145 MHz Bandwidth, 16-Bit PXI Waveform Generator 98 dB close-in SFDR at 1 MHz ±0.34 dB flatness to 120 MHz with digital flatness correction <-146 dBc/Hz phase noise density at 10 kHz offset -160 ...

Refer to the following figure and tables for information about the PXIe-5451 front panel connectors and LEDs: PXIe-5451 Signal Descriptions Signal Connector Type Access Description CLK IN SMA Input Accepts ...

In your specifications map, nest Definitions and Conditions topics under this top-level topic. Use the Definitions shared topic (GUID-0CAFCB88-62D1-4128-B786-23D00B72BCFE) with appropriate push topics. ...

Conditions Specifications are valid under the following conditions unless otherwise noted: Ambient temperature range of 0 °C to 50 °C Output voltage amplitudes with a 50 Ω load SINE out voltage amplitude ...

In your specifications map, nest Definitions and Conditions topics under this top-level topic. Use the Definitions shared topic (GUID-0CAFCB88-62D1-4128-B786-23D00B72BCFE) with appropriate push topics. ...

In your specifications map, nest Definitions and Conditions topics under this top-level topic. Use the Definitions shared topic (GUID-0CAFCB88-62D1-4128-B786-23D00B72BCFE) with appropriate push topics. ...

These specifications apply to the 8 MB, 32 MB, 256 MB, and 512 MB PXI-5422. Conditions Specifications are valid under the following conditions unless otherwise noted: Analog filter enabled Signals terminated ...

These specifications apply to the 32 MB, 256 MB, and 512 MB PXI-5441. In your specifications map, nest Definitions and Conditions topics under this top-level topic. Use the Definitions shared topic (GUID-0CAFCB88-62D1-4128-B786-23D00B72BCFE) ...

These specifications apply to the 32 MB, 256 MB, and 512 MB PXIe-5442. In your specifications map, nest Definitions and Conditions topics under this top-level topic. Use the Definitions shared topic (GUID-0CAFCB88-62D1-4128-B786-23D00B72BCFE) ...

These specifications apply to the 128 MB, 512 MB, and 2 GB PXIe-5451. If the PXIe-5451 has been in use, it may exceed safe handling temperatures and cause burns. Allow the PXIe-5451 to cool before removing ...

NI recommends using the SCB-19 connector block to connect digital signals to the AUX 0 connector on the PXIe-5413 front panel. Refer to the following figure and table for information about the SCB-19 signals ...

Showing 1-30 of 73 results
1 of 3 pages