Filtered Results

Each panel in InstrumentStudio has its own instrument header menu, which you can access by clicking the instrument header menu icon () in the upper-right corner of the panel. Within the instrument header ...

You can change the channel operating mode of an SMU/Power Supply channel to Voltage Sequence or Current Sequence mode to enable power sequencing. Power sequencing allows you to output the desired power-up ...

You must enter debug mode to access the Monitor and Control buttons. Refer to Entering Debug Mode for more information. Complete the following steps to monitor and/or control a device in InstrumentStudio ...

Complete the following steps to measure spectral density in InstrumentStudio: Add an oscilloscope to the large panel. Create an FFT channel by selecting the FFT button in the Add Channels section of the ...

After enabling at least one FFT channel and markers, you can use the peak search functions to locate peaks. Peaks are the samples for which the amplitude rises and falls around a threshold. You can move ...

Creating a Layout Automatically When you create a layout automatically, InstrumentStudio detects devices you have installed and creates panels using those devices. Complete the following steps to create ...

Complete the following steps to debug a C, C++, or .NET application using InstrumentStudio. Supporting communication with a device in C, C++, or .NET environments at breakpoints requires additional overhead ...

In InstrumentStudio, device synchronization generally falls under two categories: software and hardware. Software Synchronization Hardware Synchronization Channel acquisition and generation is sequenced ...

Adjust the arrangement of soft front panels and their associated devices with the Edit Layout window. An InstrumentStudio layout consists of one large panel and up to four small panels. A large panel includes ...

Support for Hosted ApplicationsSupport for hosted applications is experimental in InstrumentStudio 2019. To help you work with hosted applications, National Instruments provides a LabVIEW template and ...

If InstrumentStudio is closed and a device used in an InstrumentStudio project goes offline or has its name changed, InstrumentStudio flags that device as missing the next time you open the project. The ...

When specifying a range for a voltage or current measurement, you can select Auto or Auto once to measure a signal when you do not know which range to select. The digital multimeter (DMM) takes a series ...

Adjust data capture preferences by selecting FilePreferences and navigating to the Capture data tab. In this tab, you can set the destination directory and change the filename and format for both images ...

You can use InstrumentStudio to troubleshoot devices currently in use by an external application. An external application is any application running outside of InstrumentStudio, including LabVIEW, TestStand, ...

Complete the following steps to disable debugging for a device: Open the Configure Debug Session window by selecting Configure debug session from the instrument header menu. Deselect the Debug Enabled ...

You can enter debug mode from the Home screen by selecting Debug. Using this method, InstrumentStudio searches for open device driver sessions and then creates a layout based on the devices it discovers. ...

Once you have configured a device in InstrumentStudio, you can export the device's settings to a device configuration file, which can then be imported to LabVIEW or another application to apply the device ...

Add a waveform generator device to the large panel. Select a waveform mode from the drop-down menu in the upper-right corner of the large panel. Standard waveform—Generates a waveform using the channel ...

Compensation consists of measuring the error and applying the measured error to the actual measurement to correct and minimize the errors introduced by the test system. The compensation values must be ...

You can use SourceAdapt technology to customize the source measure unit (SMU) response to any load. For more information on National Instruments' SourceAdapt technology, refer to NI SourceAdapt Next-Generation ...

Device Operating ModesYou can use one of the following modes for acquiring measurements using an SMU or VPS device in InstrumentStudio: Chart, Waveform, and Sweep. Operating Mode Sourcing Behavior Large ...

Disabled—Disables FFT averaging. RMS—Root mean square. RMS averaging averages the energy (or power) of the signal, so it reduces signal fluctuations, but not the noise floor. Peakhold—Performs a peak hold ...

You can set the interpolation method of an oscilloscope acquisition to one of the following settings from the Instrument Settings window: No interpolation—The oscilloscope does not interpolate data. Auto—The ...

Exporting an InstrumentStudio Configuration From the top toolbar or the instrument header menu, select the Export to TestStand button ().You must have TestStand 2019 or later installed for the Export to ...

A waveform generator channel can be in one of the following states: Stopped—Waveform generation is stopped on this channel. Running—Waveform generation is running on this channel. Waiting for trigger—Waveform ...

Standard Waveform—Outputs waveforms according to the channel settings you specify in InstrumentStudio or an external application. Using a standard waveform allows you to generate several different standard ...

The following measurement types are available when creating oscilloscope channels with InstrumentStudio. Amplitude Mid Ref Volts Mean Negative Duty Cycle Peak-to-Peak Low Ref Volts Median Positive Pulse ...

SMU/Power Supply Channel Output Status Icon Status Description Generating Output One or more channels in the panel are sourcing voltage or current. Not Generating Output No channels in the panel are sourcing ...

Depending on the device, you can select different sampling methods from the Instrument Settings window of an oscilloscope: Real time—Gathers all the samples for a waveform in one acquisition with one trigger ...

Default setup—Returns the device to the default configuration. Auto setup—Enables all channels and automatically configures device settings. Settings Changed by Auto Setup Setting an oscilloscope to Auto ...

Showing 1-30 of 36 results
1 of 2 pages