Filtered Results

Skip to Content Bookmarks Watch List Search Preferences Log in NI-9213 Getting Started 16-CH, ±78 mV, 24 Bit, 75 S/s Aggregate Where to Go Next Tags: Getting Started NI-9213 class="topictitle1" id="GUID-65318F5D-7AC8-48D5-BDFA-ABD454685F5F__GUID-57F5B3A6-9173-45EC-8EC3-B16A63F796D2">Where ...

Each channel passes through a differential filter and then is multiplexed and sampled by a 24-bit analog-to-digital converter (ADC). The channels share a common ground, COM, that is isolated from other ...

The following specifications are typical for the range -40 °C to 70 °C unless otherwise noted. Caution Do not operate the NI-9213 in a manner not specified in this document. Product misuse can result in ...

What to Use NI-9213 spring-terminal connector 0.08 mm 2 to 1.0 mm 2 ( 28 AWG to 18 AWG ) copper conductor wire with 7 mm ( 0.28 in. ) of insulation stripped from the end Flathead screwdriver with a

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...

The NI-9213 is suitable for use in Class I, Division 2, Groups A, B, C, D, T4 hazardous locations; Class I, Zone 2 , AEx nA IIC T4 Gc and Ex nA IIC T4 Gc hazardous locations; and nonhazardous locations ...

The NI 9213 has been evaluated as Ex nA IIC T4 Gc equipment under DEMKO 07 ATEX 0626664X and is IECEx UL 14.0089X certified. Each NI 9213 is marked II 3G and is suitable for use in Zone 2 hazardous

If hazardous voltages are connected to the product, take the following precautions. A hazardous voltage is a voltage greater than: 30 V RMS , 42.4 V peak , or 60 V DC in DRY LOCATIONS 16 V RMS , 22.6

If your application is subject to high vibration, NI recommends that you use the NI-9940 backshell kit to protect connections to the NI-9213 . Parent topic: Overview

Some products are approved for marine (shipboard) applications. To verify marine approval certification for a product, visit ni.com/product-certifications , search by model number, and click the appropriate ...

This document explains how to connect to the NI-9213 . Note Before you begin, read the NI-9213 Safety, Environmental, and Regulatory Information document on ni.com/manuals and complete the software and ...

NC TC0+ TC2+ TC4+ TC6+ TC8+ TC10+ TC12+ TC14+ COM TC1+ TC3+ TC5+ TC7+ TC9+ TC11+ TC13+ TC15+ TC0– NC TC1– TC3– TC5– TC7– TC9– TC11– TC13– TC15– TC2– TC4– TC6– TC8– TC10– TC12– TC14– COM 1 2 3 4

Ensure that the environment in which you are using the NI 9213 meets the following specifications. Operating temperature (IEC 60068-2-1, IEC 60068-2-2) -40 °C to 70 °C Operating humidity (IEC 60068-2-78) ...

Caution Observe all instructions and cautions in the user documentation. Using the product in a manner not specified can damage the product and compromise the built-in safety protection. Attention Suivez ...

Connect only voltages that are within the following limits: Between any two terminals ±30 V maximum Isolation Channel-to-channel None Channel-to-earth ground Continuous 250 V RMS , Measurement Category ...

Visit ni.com/support to find support resources including documentation, downloads, and troubleshooting and application development self-help such as tutorials and examples. Visit ni.com/services to learn ...

Changes in the ambient air temperature near the front connector or a thermocouple wire conducting heat directly to terminal junctions can cause thermal gradients. Observe the following guidelines to minimize ...

This document describes the range of software versions required for the aforementioned devices and links to the most recent documentation resources available at ni.com/manuals for each device. Note: Your ...

This document describes the memory volatility under normal use conditions for the NI 9213.

This is the Letter of Volatility for the NI 9213/9214.

This guide describes how to select a C Series cable or accessory that is compatible with your C Series Module. National Instruments provides over a hundred different C Series I/O models. This guide includes ...

NI is discontinuing several legacy product lines on September 28th, 2018. We understand that this is a large change to the overall product portfolio. In order to ease the difficultly of this change we ...

This tutorial lists the C Series modules for the CompactDAQ product line and the CompactRIO product line. It does not include compatibility for CompactRIO Single Board (sbRIO) Controllers. For a list of ...

Use this guide to match your C Series Modules with spring terminal front connection with a compatible cable and accessory to meet the needs of your application, whether you are creating a new configuration, ...

This page documents all the applicable standards and certifications for the NI-9213 and provides downloadable certifications.

Skip to Content Bookmarks Watch List Search Preferences Log in NI-9213 Calibration Procedure Last Updated: 2022-04-30 Tags:   Calibration Procedure NI-9213 This document contains the verification and adjustment ...

NI 9210: 4-Channel, 14 S/s Aggregate, ±80 mV C Series Temperature Input Module NI 9211: 4-Channel, 14 S/s Aggregate, ±80 mV C Series Temperature Input Module NI 9212: 8-Channel, 95 S/s/ch Simultaneous, ...

Showing 1-30 of 30 results