Filtered Results

Before proceeding, verify that the PXIe-4138/4139 appears in MAX. If the ACCESS LED fails to light after you power on the chassis, a problem may exist with the chassis power rails, a hardware module, or ...

Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX informs other programs about which NI hardware products are in the system and how they are configured. MAX is automatically ...

In the MAX configuration tree, expand Devices and Interfaces . Expand the Chassis tree to see the list of installed hardware, and press to refresh the list. If the module is still not listed, power ...

Notice To prevent damage to the PXIe-4138/4139 caused by ESD or contamination, handle the module using the edges or the metal bracket. Ensure the AC power source is connected to the chassis before installing ...

You must be an Administrator to install NI software on your computer. Install an ADE, such as LabVIEW or LabWindows™/CVI™. Download the driver software installer from ni.com/downloads . NI Package Manager ...

This document explains how to install, configure, and test the PXIe-4138/4139 . Go to ni.com/r/downloaddcpower to download the latest NI-DCPower driver software to program the module. Note Before you begin, ...

Figure 1. NI 4138/4139 Kit Contents 3 1 2 OUTPUT CAT I ACCESS ACTIVE LO NSE LO ARD HI ARD NSE HI System SMU NI PX I e - 4138 OUTPUT ±60 V , 3 A MAX 150 V MAX

Restart the system. Launch MAX. Failed self-test Perform self-calibration, then perform the self-test again. The PXIe-4138/4139 must be calibrated to pass the self-test. Failed self-calibration Perform ...

There are several required items not included in your PXIe-4138/4139 kit that you need to operate the PXIe-4138/4139. Your application may require additional items not included in your kit to install or ...

Ensure that the environment you are using the PXIe-4138/4139 in meets the following specifications:

You can generate signals interactively using InstrumentStudio or you can use the NI-DCPower instrument driver to program your device in the supported ADE of your choice.

Note In this document, the PXIe-4139 (40W) and PXIe-4139 (20W) are referred to inclusively as the PXIe-4139. The information in this document applies to all versions of the PXIe-4139 unless otherwise specified. ...

NI PXIe-4138 System SMU ±60 V , 3 A MAX 150 V MAX to LO SENSE LO SENSE HI HI GUARD GUARD ACCESS ACTIVE OUTPUT OUTPUT CAT I C D E F G H I J A B K Table

NI PXIe-4139 Precision System SMU 60 V , 3 A, 10 A Pulse MAX 150 V MAX to LO SENSE LO SENSE HI HI GUARD GUARD ACCESS ACTIVE OUTPUT OUTPUT CAT I C D E F G H I J

Self-calibration adjusts the PXIe-4138/4139 for variations in the module environment. Perform a complete self-calibration after the first time you install the PXIe-4138/4139.

Visit ni.com/support to find support resources including documentation, downloads, and troubleshooting and application development self-help such as tutorials and examples. Visit ni.com/services to learn ...

If an issue persists after you complete a troubleshooting procedure, search our KnowledgeBase for additional information our technical support engineers create as they answer common user questions and ...

Notice To prevent electrostatic discharge (ESD) from damaging the module, ground yourself using a grounding strap or by holding a grounded object, such as your computer chassis. Touch the antistatic package ...

These specifications apply to the SA-413B banana jack adapter for use with NI System Source Measure Units, including the PXIe-4136/4137/4138/4139.

This documentation contains information on the PXIe-4135, PXIe-4136, PXIe-4137, PXIe-4138, PXIe-4139, PXIe-4140, PXIe-4141, PXIe-4142, PXIe-4143, PXIe-4144, and PXIe-4145.

You can manipulate the aperture time of measurements made with NI-DCPower instruments to reject specific AC noise frequencies in DC voltage and current measurements.

NI's source measure units (SMUs) are optimized for building automated test systems, with hardware features to reduce test execution time and tight software integration to reduce development effort. Built ...

This is the Letter of Volatility for the PXIe-4138/4139.

Use this compatibility guide to match your NI PXI Source Measure Units (SMUs) with a compatible cable or accessory to meet the needs of your application, to replace or expand your current configuration, ...

This document presents the common pitfalls of IC sockets and the best practices of using NI SMUs to test the chip in socket.

This page documents all the applicable standards and certifications for the PXIe-4138 and provides downloadable certifications.

Showing 1-30 of 64 results
1 of 3 pages