Filtered Results

The National Instruments website is your complete resource for technical support. At ni.com/support , you have access to everything from troubleshooting and application development self-help resources ...

Add a While Loop to continuously generate the signal and check the generation status until you click the Stop button.

Use Measurement & Automation Explorer (MAX) to configure your National Instruments hardware. MAX informs other programs about which devices reside in the system and how they are configured. MAX is automatically ...

The NI 5650/5651/5652 is a precision RF instrument that is sensitive to ESD and transients. Ensure you take the following precautions when making direct connections to the NI 5650/5651/5652 to avoid damaging ...

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits are designed ...

The LEDs may not illuminate until the device has been configured in MAX. Before proceeding, verify that the NI 5650/5651/5652 appears in MAX. If the ACCESS LED fails to illuminate after you power on the ...

In the MAX configuration tree, click Devices and Interfaces . Expand the Chassis tree to see the list of installed devices, and press to refresh the list. If the module is still not listed, power ...

Caution To prevent damage to the device caused by ESD or contamination, handle the device using the edges or the metal bracket. Ensure the AC power source is connected to the chassis before installing ...

To use the NI 5650/5651/5652 with other devices, you must make connections using SMA cables. For best results when connecting signals to the NI 5650/5651/5652 front panel SMA connectors, use shielded low-loss ...

Restart the system. Launch MAX, and perform the self-test again. Power off the chassis. Reinstall the failed module in a different slot. Power on the chassis. Perform the self-test again.

You must be an Administrator to install NI software on your computer. Install an ADE, such as LabVIEW or LabWindows™/CVI™. Insert the driver software DVD into your computer. The installer should open automatically. ...

Note Before you begin, install and configure your chassis and controller. This document explains how to install, configure, and test the NI PXI-5650/5651/5652 ( NI 5650/5651/5652 ) as a stand-alone device. ...

There are several required items not included in your device kit that you need to install or operate the NI 5650/5651/5652.

You can generate signals interactively using the NI-RFSG Soft Front Panel (SFP) or you can use the NI-RFSG instrument driver to program your device in the supported ADE of your choice. Table 4. NI 5650/5651/5652 ...

Examples demonstrate the functionality of the device and serve as programming models and building blocks for your own applications. The NI Example Finder is a utility available for some ADEs that organizes ...

Definitions Warranted specifications describe the performance of a model under stated operating conditions and are covered by the model warranty. Characteristics describe values that are relevant to the ...

If an issue persists after you complete a troubleshooting procedure, contact NI technical support or visit ni.com/support.

Caution To prevent electrostatic discharge (ESD) from damaging the device, ground yourself using a grounding strap or by holding a grounded object, such as your computer chassis. Touch the antistatic package ...

NI PX I- 56 52 500 kHz - 6.6 GHz RF Signal Generator ACCESS A C TI VE 50 Ω IN: 5 Vp-p MAX OUT: 1 Vp-p REF IN/OUT RF OUT 50 Ω 0.5 W MAX Reverse Power 1 2

Refer to the following figure for information about other product tasks and associated resources for those tasks.

This page shows the supported versions of NI-RFSG Devices compatible with NI-DAQmx-Based Runtime. Reference this information to ensure you install the correct driver version when upgrading or updating ...

This is the Letter of Volatility for the PXI-565x.

This page documents all the applicable standards and certifications for the PXI-5650 and provides downloadable certifications.

Showing 1-30 of 32 results
1 of 2 pages