Filtered Results

Caution The protection provided by the PXI-2569 can be impaired if it is used in a manner not described in this document. Definitions Warranted specifications describe the performance of a model under ...

A switch topology is an organizational representation of the channels and relays on a switch module.

Triggering support varies between swtich modules. To identify whether triggering is supported, search for the module to locate it in the sections below. If the module is not found, then it does not support ...

Initializing with Topology for NI SwitchBlock Devices Use the topology of the NI SwitchBlock device you created in MAX and one of the VIs or functions described in the following sections to initialize ...

PXI-2800 Carrier for the NI SwitchBlock The PXI-2800 carrier for the NI SwitchBlock operates within a PXI chassis or, when connected to a PXI peripheral slot or a PXI Express hybrid peripheral slot, within ...

Scanning is typically used when the timing of connections must be synchronized with an event from another device, such as a measurement device (hardware-timed scanning), or must be timed by software (software-timed ...

Environment NI switch modules use components whose performance can be adversely affected by operation outside the specified limits. For more information, refer to the Environment section in the specifications ...

NI switches typically specify a conservative estimation of the expected life of the electromechanical relay components. Relay life is specified as a minimum number of cycles before the end of the relay ...

Characteristic impedance is a transmission line parameter that determines how propagating signals are transmitted or reflected in the line.

Installing the NI SwitchBlock Refer to the NI Switches Getting Started Guide for information about installing an NI SwitchBlock carrier or card. Refer to the expansion bridge documentation for information ...

Armature relays are a type of electromechanical relay made of coils, an armature mechanism, and contacts.

Replacing a Fuse on the NI SwitchBlock Carrier An LED on the backplane inside the NI SwitchBlock carrier indicates the condition of the carrier fuse. The carrier fuse is field replaceable. If one of the ...

The NI SwitchBlock is a high-density, customizable, and expandable system that can operate within a PXI/PXI Express chassis and is composed of an NI SwitchBlock carrier that holds interconnectable NI SwitchBlock ...

This is the Letter of Volatility for the PXI/PXIe-2569.

NI is discontinuing several legacy product lines on September 28th, 2018. We understand that this is a large change to the overall product portfolio. In order to ease the difficultly of this change we ...

This guide describes how to select an NI Switch cable or accessory that is compatible with your NI Switch hardware. When working with NI Matrix Switch modules, NI Multiplexer Switch Modules, NI Relay or ...

Use this guide to match your NI General Purpose Relay and Relay Driver models PXI or PXI Express (PXIe) device with a compatible cable and accessory to meet the needs of your application, whether you are ...

If you are trying to create a custom Switch cable, create a custom fixture or breakout, modify an existing cable, repair or replace the connector on your cable or printed circuit board (PCB), this document ...

This page documents all the applicable standards and certifications for the PXI-2569 and provides downloadable certifications.

Showing 1-22 of 22 results