Filtered Results

Read the NI-9402 Safety, Environmental, and Regulatory Information and complete the software and hardware installation procedures in your chassis documentation.

You can connect digital devices to the NI-9402 . Figure 1. Connecting Digital Devices to the NI-9402 +3.3 V +5 V DIO0 as Input DIO1 as Input DIO2 as Output NI 9402 LED Switch TTL Signal Parent topic: NI ...

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...

The NI-9402 is suitable for use in Class I, Division 2, Groups A, B, C, D, T4 hazardous locations; Class I, Zone 2 , AEx nA IIC T4 Gc and Ex nA IIC T4 Gc hazardous locations; and nonhazardous locations ...

The NI 9402 has been evaluated as Ex nA IIC T4 Gc equipment under DEMKO 07 ATEX 0626664X and is IECEx UL 14.0089X certified. Each NI 9402 is marked II 3G and is suitable for use in Zone 2 hazardous

Some products are approved for marine (shipboard) applications. To verify marine approval certification for a product, visit ni.com/product-certifications , search by model number, and click the appropriate ...

DIO 3 GND DIO 2 GND DIO 0 GND DIO 1 GND Table 1. Signal Descriptions Signal Description DIO Digital input/output signal connection GND Ground connection Parent topic: Before You Begin

Ensure that the environment in which you are using the NI 9402 meets the following specifications. Operating temperature (IEC 60068-2-1, IEC 60068-2-2) -40 °C to 70 °C Operating humidity (IEC 60068-2-78) ...

Caution Observe all instructions and cautions in the user documentation. Using the product in a manner not specified can damage the product and compromise the built-in safety protection. Attention Suivez ...

Connect only voltages that are within the following limits: Channel-to-earth ground ±30 V maximum Isolation Channel-to-channel None Channel-to-earth ground None Parent topic: Safety Guidelines

Visit ni.com/support to find support resources including documentation, downloads, and troubleshooting and application development self-help such as tutorials and examples. Visit ni.com/services to learn ...

The following specifications are typical for the range -40 °C to 70 °C unless otherwise noted. All voltages are relative to GND unless otherwise noted. Caution Do not operate the NI-9402 in a manner not ...

BNC connectivity CompactDAQ counter compatibility Individually configurable channel directions The NI 9402 is a digital input/output module for any CompactDAQ or CompactRIO system. You can configure the ...

Skip to Content Bookmarks Watch List Search Preferences Log in NI-9402 Getting Started 4 DIO, LVTTL, Bidirectional, 55 ns Where to Go Next Tags: Getting Started NI-9402 class="topictitle1" id="GUID-31CFDB1F-F94E-4AD2-8A53-8BF9FEBD327B__GUID-8FAFDEA8-DE84-4C9A-BC9D-8B09B9A2982C">Where ...

This document describes the range of software versions required for the aforementioned devices and links to the most recent documentation resources available at ni.com/manuals for each device. Note: Your ...

This document lists the specifications for the NI 9402.

This document describes the memory volatility under normal use conditions for the NI 9402.

This document describes how to begin using the NI 9402.

This guide describes how to select a C Series cable or accessory that is compatible with your C Series Module. National Instruments provides over a hundred different C Series I/O models. This guide includes ...

This tutorial lists the C Series modules for the CompactDAQ product line and the CompactRIO product line. It does not include compatibility for CompactRIO Single Board (sbRIO) Controllers. For a list of ...

Use this guide to match your C Series Modules with BNC front connection with a compatible cable and accessory to meet the needs of your application, whether you are creating a new configuration, replacing ...

This article explains which NI C Series modules you can use to access the counters or timers on your CompactDAQ (cDAQ) chassis or controller's backplane. Use this article if you want to use a quadrature ...

This page documents all the applicable standards and certifications for the NI-9402 and provides downloadable certifications.

Signal Descriptions Signal Description DIO Digital input/output signal connection GND Ground connection

Showing 1-29 of 29 results