Filtered Results

You can connect quarter-bridge sensors to the NI-9236 . NI 9236 EXC AI RC 1 1 2 You must connect each EXC terminal to only one strain gage to maintain the channel-to-channel crosstalk performance of the ...

What to Use NI-9236 spring-terminal connector copper conductor wire with of insulation stripped from the end Flathead screwdriver with a 2.3 mm x 1.0 mm ( 0.09 in. x 0.04 in. ) blade, included with the ...

Spring terminal connectivity 60 V DC , CAT I , channel-to-earth isolation 8 channels, 10 kS/s per channel, simultaneous dynamic strain analog input ±29.4 mV/V input range, 24-bit resolution Built-in voltage ...

Read the NI-9236 Safety, Environmental, and Regulatory Information and complete the software and hardware installation procedures in your chassis documentation.

The NI-9236 provides connections for eight 350 Ω quarter-bridge input channels. Figure 1. NI-9236 Pinout 1 2 3 4 5 6 7 8 9 10 11 12 EXC1 AI1 RC1 EXC3 AI3 RC3 EXC5 AI5 RC5 EXC7 AI7 RC7 EXC0

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...

The NI-9236 is suitable for use in hazardous locations; , and hazardous locations; and nonhazardous locations only. Follow these guidelines if you are installing the NI-9236 in a potentially explosive ...

The NI-9236 has been evaluated as equipment under DEMKO ATEX and is IECEx certified. Each NI-9236 is marked and is suitable for use in Zone 2 hazardous locations, in ambient temperatures of -40 °C ≤ Ta ...

Visit ni.com/support to find support resources including documentation, downloads, and troubleshooting and application development self-help such as tutorials and examples. Visit ni.com/services to learn ...

If your application is subject to high vibration, NI recommends that you use the NI-9965 backshell kit to protect connections to the NI-9236 . Parent topic: Connecting the NI-9236

Some products are approved for marine (shipboard) applications. To verify marine approval certification for a product, visit ni.com/product-certifications , search by model number, and click the appropriate ...

Ensure that the environment in which you are using the NI-9236 meets the following specifications. Operating temperature (IEC 60068-2-1, IEC 60068-2-2) -40 °C to 70 °C Operating humidity (IEC 60068-2-30) ...

Caution Observe all instructions and cautions in the user documentation. Using the product in a manner not specified can damage the product and compromise the built-in safety protection. Attention Suivez ...

Connect only voltages that are within the following limits: Between any two terminals ±30 V maximum Isolation Channel-to-channel None Channel-to-earth ground Continuous 60 V DC, Measurement Category I ...

CompactRIO NI CompactDAQ RELATED INFORMATION C Series Documentation & Resources ni.com/info cseriesdoc Services ni.com/services NI 9235 Datasheet NI-RIO Help LabVIEW FPGA Help NI 9235 Datasheet NI-DAQmx ...

This document describes the range of software versions required for the aforementioned devices and links to the most recent documentation resources available at ni.com/manuals for each device. Note: Your ...

This document describes the memory volatility under normal use conditions for the NI 9235/9236.

This guide describes how to select a C Series cable or accessory that is compatible with your C Series Module. National Instruments provides over a hundred different C Series I/O models. This guide includes ...

NI is discontinuing several legacy product lines on September 28th, 2018. We understand that this is a large change to the overall product portfolio. In order to ease the difficultly of this change we ...

This tutorial lists the C Series modules for the CompactDAQ product line and the CompactRIO product line. It does not include compatibility for CompactRIO Single Board (sbRIO) Controllers. For a list of ...

Use this guide to match your C Series Modules with spring terminal front connection with a compatible cable and accessory to meet the needs of your application, whether you are creating a new configuration, ...

This page documents all the applicable standards and certifications for the NI-9236 and provides downloadable certifications.

Skip to Content BookmarksWatch ListSearch PreferencesLog in NI-9235/9236 Calibration Procedure • Last Updated: 2022-04-30 • Tags:  ○ Calibration Procedure ○ NI-9236 ○ NI-9235 This document contains information ...

NI 9235: 10 kS/s/channel, 120 Ω Quarter-Bridge Strain Gage, 8-Channel C Series Strain/Bridge Input Module NI 9236: 10 kS/s/channel, 350 Ω Quarter-Bridge Strain Gage, 8-Channel C Series Strain/Bridge Input ...

Showing 1-25 of 25 results