Filtered Results

Located at ni.com/manuals Installs with the software CompactRIO NI CompactDAQ RELATED INFORMATION NI 9209 Datasheet NI-RIO Help LabVIEW FPGA Help NI 9209 Datasheet NI-DAQmx Help LabVIEW Help Services ni.com/services ...

250 V RMS , CAT II , channel-to-earth isolation (spring terminal); 60 V DC , CAT I , channel-to-earth isolation (DSUB) DSUB or spring terminal connectivity 50Hz/60 Hz noise rejection The NI-9209 voltage ...

The following specifications are typical for the range -40 °C to 70 °C unless otherwise noted. All voltages are relative to COM unless otherwise noted. Caution Do not operate the NI-9209 in a manner not ...

Make sure that devices you connect to the NI-9209 are compatible with the module specifications. You must use 2-wire ferrules to create a secure connection when connecting more than one wire to a single ...

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...

The NI-9209 is suitable for use in hazardous locations; , and hazardous locations; and nonhazardous locations only. Follow these guidelines if you are installing the NI-9209 in a potentially explosive ...

The NI-9209 has been evaluated as equipment under DEMKO ATEX and is IECEx certified. Each NI-9209 is marked and is suitable for use in Zone 2 hazardous locations, in ambient temperatures of -40 °C ≤ Ta ...

If your application is subject to high vibration, NI recommends that you use the NI-9940 backshell kit to protect connections to the NI-9209 with spring terminal . Parent topic: NI-9209 Connection Guidelines ...

Some products are approved for marine (shipboard) applications. To verify marine approval certification for a product, visit ni.com/product-certifications , search by model number, and click the appropriate ...

Connect only voltages that are within the following limits: Isolation Channel-to-channel None Channel-to-earth ground Continuous 60 V DC , Measurement Category I Withstand 1,000 V RMS up to 3,000 m, verified ...

This document explains how to connect to the NI-9209 . In this document, the NI-9209 with spring terminal and the NI-9209 with DSUB are referred to inclusively as the NI-9209 . Note Before you begin, read ...

Table 1. Signal Descriptions Signal Description AI Analog input signal connection COM Common reference connection to isolated ground NC No connection Parent topic: Overview

Ensure that the environment in which you are using the NI-9209 meets the following specifications. Operating temperature (IEC 60068-2-1, IEC 60068-2-2) -40 °C to 70 °C Operating humidity (IEC 60068-2-30) ...

Caution Observe all instructions and cautions in the user documentation. Using the product in a manner not specified can damage the product and compromise the built-in safety protection. Attention Suivez ...

You can connect single-ended or differential signals to the NI-9209 . Use a differential measurement configuration to attain more accurate measurements and less noise. The following table shows the signal ...

Connect only voltages that are within the following limits: Isolation Channel-to-channel None Channel-to-earth ground Continuous 250 V RMS , Measurement Category II Withstand up to 5,000 m 3,000 V RMS ...

Visit ni.com/support to find support resources including documentation, downloads, and troubleshooting and application development self-help such as tutorials and examples. Visit ni.com/services to learn ...

This document describes the range of software versions required for the aforementioned devices and links to the most recent documentation resources available at ni.com/manuals for each device. Note: Your ...

This document describes the memory volatility under normal use conditions for the NI 9209.

This guide describes how to select a C Series cable or accessory that is compatible with your C Series Module. National Instruments provides over a hundred different C Series I/O models. This guide includes ...

NI is discontinuing several legacy product lines on September 28th, 2018. We understand that this is a large change to the overall product portfolio. In order to ease the difficultly of this change we ...

This tutorial lists the C Series modules for the CompactDAQ product line and the CompactRIO product line. It does not include compatibility for CompactRIO Single Board (sbRIO) Controllers. For a list of ...

Use this guide to match your C Series Modules with a D-Sub front connection with a compatible cable and accessory to meet the needs of your application, whether you are creating a new configuration, replacing ...

Use this guide to match your C Series Modules with spring terminal front connection with a compatible cable and accessory to meet the needs of your application, whether you are creating a new configuration, ...

This page documents all the applicable standards and certifications for the NI-9209 and provides downloadable certifications.

Showing 1-30 of 32 results
1 of 2 pages