Filtered Results

I have a CompactRIO (cRIO) set up such that some of my modules are utilizing Scan Mode and some of my modules have custom code written in an FPGA VI. My project looks similar to the one pictured below ...

Is the NI-DAQmx driver compatible with the CompactRIO platform? I have some VIs written using NI-DAQmx that I would like to use on a CompactRIO, which model should I get?

This tutorial provides step-by-step instructions to help you set up your EtherCAT system using anEthernet CompactRIO Chassis and LabVIEW graphical programming. Follow these guidelines to go from unpacking ...

I have a Real-Time controller with two Ethernet ports. How do I configure the two ports, and what can I do with these two Ethernet ports? I have configured both Real-Time target's (PXIe and Ethernet cRIO) ...

I am able to see my CompactRIO (cRIO) under Remote Systems in NI Measurement & Automation Explorer (MAX). However, when I expand Devices and Interfaces under the cRIO, I can't see my C Series I/O modules. ...

I need to reset or reboot my Real-Time Target. What are the different ways of accomplishing this?

I would like to use Direct Memory Access (DMA) to transfer data from my FPGA target to my host (or vice versa), but I am not sure how many DMA Channels or FIFOs are on my FPGA target. How can I find out ...

When I use Google Chrome, Mozilla Firefox, or Safari, I cannot access Remote Front Panels, NI Network Browser or the Web Interface (WIF). I get an error message similar to the following: This plugin is ...

Can I set up a host or HMI (Human Machine Interface) VI and run it along with an Embedded UI on my CompactRIO?

I am connecting from a cRIO to an HTTP server and am getting the following error at HTTP Client Get: Error 59: Possible Reasons: the network is down, unreachable, or has been reset. Why is this occurring ...

My FPGA VI has a broken run arrow that points to:I/O Node: Notsupported from current target. Close the VI and reopen it in the Project Explorer window under a target that supports I/O nodes. I am trying ...

I am using the Replication and Deployment (RAD) utility to retrieve an application image from a RIO. When I click 'Retrieve', I get Error -2147220314:The operation failed because of insufficient permissions. ...

I am trying to change my NI Linux Real-Time device timezone according to the steps foundhere. However, the timezone of the device that I see from MAX in the Time Settings tab is not aligned with the one ...

I'm trying to install the Model Interface Toolkit to my CompactRIO device, but during the installation NI-MAX keeps showing the following error message: I have checked, and the VeriStand Model Framework ...

My application (created in LabVIEW) was reading/writing from/to files in my cRIO controller when a power failure occurred. After my system rebooted, I got some corrupted files. How can fix or prevent this? ...

I would like to deploy images to cRIO controllers that are in a remote location, without having to send out a technician on site with a laptop. Can this be done remotely?

CompactRIO with NI-DAQmx is the latest addition to the CompactRIO controller family. It brings two software experiences into one by combining the ease-of-use of NI-DAQmx and the low-level functionality ...

I have a USB Hard Drive formatted toEXT3 connected to my CompactRIO (cRIO) controller. However, when I go to try to move files to the the drive on the cRIO, I get an error from Windows stating: Error: ...

I am interested in maximum power consumption at the boot of compactRIO device. WhenI see the specification sheet of compactRIO, there is Maximum power consumption item. But I thinkthat when the device ...

When I use network streams to transfer data between host and cRIO, when I close the VI on host and restart it, the error code -314004 will occur which may cause by destorying the connection when host VI ...

This tutorial provides an introduction to logging data to disk with CompactRIO in addition to an overview of the CompactRIO architecture and programming models available in LabVIEW.

The Ethernet RIO expansion chassis is intended to be connected to a switch, router, or existing Ethernet network; however, you can connect it to the secondary port of a real-time controller. When using ...

This tutorial discusses communication between a host PC, or HMI, and a private network target, which is connected to the secondary port of a dual Ethernet port LabVIEW Real-Time controller. Ethernet port ...

Note: NI will remove support for Phar Lap for cRIO in the NI 2020 Software Release and for PXI in the NI 2022 Software Release. For more information, please see the Phar Lap RT OS EOL Road Map. You may ...

I want to use VPN for security of the communication. How can I build the VPN network with NI Linux Real-Time target?

This document discusses the use of NI CompactRIO hardware as a machine vision platform and provides a tutorial for adding machine vision to your CompactRIO application. Setting up an IP camera on a Single-Board ...

I have several disconnected and unused CompactRIOs showing in NI-MAX, and I want to delete them programmatically through a LabVIEW project. How can I do this?

Receiving error -50101, -50152 or -61018 when trying to communicate with a remote CompactRIO device. This behavior is showing up either when I try to download an FPGA VI, detect C-Series modules in LabVIEW, ...

I am trying to set up network streams recieve one of the following errors: Error -314004: Failed to Connect. or Error -314004 occurred at Create Network Stream Writer Endpoint Possible reason(s): ...

Showing 1-30 of 180 results
1 of 6 pages