Filtered Results

My digital or counter task seems to be reading values incorrectly, and I suspect it may be due to a noisy input signal. How do I apply a debounce filter to my digital signal? My digital or counter input ...

I want to utilize the filter on NI DAQ card. I have noise in my environment that's coming through to my signal and saw that my card has filtering capabilities. What is the cutoff frequency of this filter? ...

How can I synchronize timing for my R Series FPGA boards, either inside of my PXI chassis or in a RTSI-connected PCI system?

I have old DAQ hardware or hardware that uses DAQmx that I am not sure is supported in my version of LabVIEW. How do I determine if my version of LabVIEW or DAQmx is compatible with my hardware and operating ...

I am trying to synchronize a counter input with multiple analog inputs, but I keep running into errors. I am trying to figure out if this is possible to do and if so, how to do it properly.

When I insert my PXI card into my system, it appears in NI Measurement & Automation Explorer (NI MAX) as a PCI card.

Are the grounds on my X Series, M Series, E Series and S Series DAQ devices all tied together?

This document lists the I/O terminal summary and specifications for the devices that make up the NI 6040E family of devices.

This document provides SCB-68A labels you can use with your NI 60xx/60xxE (formerly referred to as B Series and E Series) multifunction I/O devices or modules.

This user manual contains information about using the National Instruments E Series data acquisition (DAQ) and Basic (B Series) Multifunction DAQ devices with NI-DAQ.

This document contains instructions in English, French, German, Japanese, Korean, and Simplified Chinese. This document explains how to install the NI-DAQmx driver software, your data acquisition (DAQ) ...

The DAQ Getting Started Guide describes how to confirm your NI data acquisition (DAQ) device is operating properly using the Measurement & Automation Explorer (MAX), configuring a task using the DAQ Assistant, ...

This document provides SCB-68 labels you can use with your NI 60xx/60xxE (formerly referred to as B Series and E Series) multifunction I/O devices or modules.

This document explains how to install the application and NI-DAQmx driver software, set up your PXI/PXI Express DAQ module, confirm the module is operating properly, and take your first measurement.

This document lists specifications for the PXIe-6386 (16-Bit, 14 MS/s/ch), 2 AO, 24 DIO, PXI Multifunction I/O module. The PXIe-6386 differs in several ways from other SMIO devices. For more information ...

16 AI (12-Bit, 500 kS/s), 2 AO, 8 DIO, PXI Multifunction I/O Device 16 SE/8 DIFF AI channels, 12-bit, 500 kSamples/s single channel, 250 kSamples/s multiple channel Two 12-bit, 512 Samples/s AO channels; ...

Signal Descriptions Signal Reference Description AI GND — Analog Input Ground—These terminals are the reference point for single-ended AI measurements in RSE mode and the bias current return point for ...

Definitions Warranted specifications describe the performance of a model under stated operating conditions and are covered by the model warranty. Characteristics describe values that are relevant to the ...

Definitions Warranted specifications describe the performance of a model under stated operating conditions and are covered by the model warranty. Characteristics describe values that are relevant to the ...

Definitions Warranted specifications describe the performance of a model under stated operating conditions and are covered by the model warranty. Characteristics describe values that are relevant to the ...

This document lists specifications for the PXIe-6396 (18-Bit, 14 MS/s/ch), 2 AO, 24 DIO, PXI Multifunction I/O module. The PXIe-6396 differs in several ways from other SMIO devices. For more information ...

PXI-6040 Specifications The following document provides the specifications for the PXI-6040. NI 6040E Family Specifications This site uses cookies to offer you a better browsing experience. Learn more ...

This guide describes how to select an NI Data Acquisition (DAQ) cable or accessory that is compatible with your NI DAQ hardware. When working with NI Multifunction I/O (MIO) models such as 63xx, 62xx, ...

Showing 1-26 of 26 results