Filtered Results

... PXIe-6361,NI PCIe-6361,NI PXIe-6363,NI PCIe-6363,NI PXIe-6356,NI ...

... Certifications PCIe-6361 Product Certifications PCIe-6361 Product ... 193522-03L CCA,PCIE-6361 Symbol Description Certification EU ...

... Drawings PCIe-6361 Dimensional Drawings PCIe-6361 Dimensional ... for the PCIe-6361. 2D Dimensional Drawings PDF DXF 3D ...

My NI USB device will occasionally lose connection to the computer, and I have to disconnect and then reconnect it before it will work. Why does this happen, and how can I get Windows to re-detect the ...

This article provides guidance on how often NI devices need to be calibrated and how to find the specific calibration interval for individual Multifunction I/O DAQ, Digital Instruments, High-Speed Digital ...

I want to know the frequency resolution of the analog output on my DAQ device. Can I calculate this myself, or is there an available approximation I can use instead?

This article outlines methods for troubleshooting and isolating the causes of measurement offset and noise in Multifunction I/O DAQ hardware.

I would like to test my M Series device in NI-DAQmx to verify that the analog outputs and analog inputs are working. Are there any special channels I should use for diagnostics?

I am running an application that is working with other cards in other computers. When I run it on this computer I get Error-200478 DAQmx Start Task.vi: 1Task Name: _unnamedTask<8>for an ...

I am recording measurements from a multifunction I/O device. Currently, Iam using the DAQ Assistant to read a number of samples and output them on a graph. This happens inside a loop to read samples continuously. ...

I'm trying to do analog reference triggering and am getting the following error: Error -200264 occurred at DAQmx Start Task.vi

I built a LabVIEWapplication and the behavior is not the same as in the development environment. The executable does not show any error, butit does not work correctly. I built an executable in LabVIEW ...

I am encountering error -200077 with a DAQmx VI: Error -200077 Requested value is not a supported value for this property. The property value may be invalid because it conflicts with another property. ...

I have a PCI(e) or PXI(e)66xx Counter/Timercard or a USB-6xxx Multifunction I/O with counter functionalityand I want to make sure the countersare working properly. How can I test mydeviceto see if it is ...

I want to know the error associated with the "Non-Linearity" of my DAQ device. What are the INL and DNL errors in the specifications of my DAQ device?

My NI USB devices are showing up with RAW in their name in Measurement & Automation Explorer (MAX) on my Windows machine. Additionally, I cannot communicate with them using Test-Panels or reset the device. ...

I have multiple NI data acquisition (DAQ) devices. When I acquire data (DAQmx Read (VI) multiple channels) and then merge them in to one TDMS file by usingTDMS Write Function, the resulting file volume ...

How do I measure current with an analog voltage input? Do I need a shunt resistor in my current measurement circuit?

I want to control a stepper motor drive (step/direction) using the digital output on my USB DAQ and I have connected all the necessary wiring, so how do I control the motor for some simple moves in LabVIEW? ...

I am using some Digital Input (DI) lines on aNI-USB 621x device. How should the ground pins be connected? Can I connect a Digital Ground (D GND) pinon a NI USB-621x to an external ground reference? What ...

This article describes how to use a PXIe-634x card to define all PXI(e) backplane trigger lines simultaneously within LAbVIEW™. For demonstration purposes, the code in this article will refer to a PXIe-6341 ...

I want more precision on my DAQ device. Can I use a smaller voltage range to get more precision with my analog input?

I want to output a chirp signal through my DAQ device in LabVIEW. Is there a way I can easily create a Chirp Signal in LabVIEW? Are there any considerations that need to be taken into account?

The following devices support programmable power up states: 6509 651x (6512, 6513, 6514, 6515) 652x (6525, 6527, 6528), All M Series boards (62xx) All X Series boards (63xx) You can set power-up states ...

I am using an analog trigger to start an input acquisition on my NI 60xxE, 62xx or 63xx (formerly E, M, or X Series) device module. I set my trigger level to a certain voltage and notice that there is ...

I have one or more channels on my DAQ device not connected to any signal or sensor or the device is disconnected from the computer. Why are all of thechannels reading the same value? Why are my channels/signals ...

Showing 1-30 of 202 results
1 of 7 pages