... for the PCIe-1427 Complex Hardware Triggering for the PCIe-1427 Updated Aug 17, 2018 Reported In Hardware PCIe-1427 Issue Details I want to trigger my ...

... Vision NI PCIe-1427 User Manual Base Configuration Camera ... Device NI PCIe-1427 User Manual September 2006 371816A-01 ... The NI PCIe-1427 is warranted against defects in materials ...

... Support PCIe-1427 Bit Depth and Tap Configuration Requirements PCIe-1427 Bit Depth and Tap Configuration Requirements ... for the PCIe-1427? Solution The PCIe-1427 only supports ...

... Drawings PCIe-1427 Dimensional Drawings PCIe-1427 Dimensional ... for the PCIe-1427. 2D Dimensional Drawings PDF DXF 3D ...

... Conditions NI PCIe-1427 Board Assembly Part Number(s) Part ... Conditions NI PCIe-1427 Terms and Definitions User Accessible ...

... the NI PCIe-1427 The NI PCIe-1427 (NI 1427) is a PCI ... helpful:  NI PCIe-1427 User Manual—Contains information about ... the NI PCIe-1427 2 ni.com • Measurement & Automation ...

... PCIe-1429 PCIe-1427 PCI-1428 PCI-1426 PXIe-1435 Driver ... PCIe-1429 PCIe-1427 PCI-1428 PCI-1426 The same basic acquisition ...

... PCI-1426 PCIe-1427 PCIe-1429 PCIe-1430 PCIe-1433 Camera ... PCI-1426, PCIe-1427, PCIe-1429, PCIe-1430 and PCIe-1433. ... and the PCIe-1427 support routing External Triggers 0-3 ...

... PCI-8252 PCIe-1427 PCIe-1430 PXI-1430C PCIe-1433 PCIe-8233 ...

... using a PCIe-1427 frame grabber. My camera has a clock ... Note: The PCIe-1427 has 16 KB of on-board memory. A 1x ...

... PCIe-1433 PCIe-1427 PXIe-1435 PCIe-1473 NI-1483 PCI-8252 ...

... Windows: PCIe-1427 PCIe-1433 PCIe-1437 PXIe-1435 Vision ...

... PCI-1424 PCIe-1427 PCI-1428 PCIe-1429 PCIe-1430 PCIe-1433 ...

... With NI PCIe-1427 Bit Depth and Tap Configuration Requirements ...

... Hardware PCIe-1427 Camera PCI-1428 Software Measurement ...

I am trying to trigger each line of my line scan camera from an encoder signal but when I run the Trigger Each Line From Encoder example, it doesn't work properly. How can I make this example work?

I have an NI PCI(e) Frame Grabber whichdoes not show up in NI Measurement and Automation Explorer. How do I fix this? I have a frame grabber that appears in NI MAX as a PCI(e) card, but does not seem to ...

Can I use NI-IMAQ from NI Vision Acquisition Software (VAS)to acquire images from a third-party frame grabber? Does NI offer VIs to use with my third-party frame grabber? Does VAS support CoaXPress frame ...

I have a line scan camera and an NI Frame Grabber. How can I set the number of lines that are acquired per IMAQ Grab?

I have two Camera Link cameras that I need to acquire images from simultaneously. Which card(s) should I use?

I am trying to connect to my camera inMeasurement & Automation Explorer (MAX) and snap or grab an image, but I am not able to do so or am getting an incorrect wrong looking image back. I see that I can ...

I want to us a CoaXPress frame grabber with LabVIEW. How can I setup the environment in order to use the frame grabber with LabVIEW?

Often times it is necessary to trigger an acquisition on a linescan camera to ensure that the resulting image is correct. This can be done in multiple ways. In this lesson we will focus on doing triggered ...

What methods can I use to send serial commands to my Camera Link camera? I have a Camera Link camera connected to an NI Frame Grabber. I need to be able to configure my camera using the serial port built-in ...

I am getting Error -1074396995: The requested image acquisition device is already in use when I run my image acquisition VI.

I am configuring my Camera Link camera through NI MAX. The user manual for my camera says that I should be able to set a certain attribute, but I do not see it listed under the available settings for my ...

I have a CameraLink camera that uses GenCP communication to change camera attributes.Can I use NI Vision Acquisition Software to communicate with and acquire images from this camera?

I am using a NI Camera Link I/O Extension board with a PCIe frame grabber. I cannot see the I/O Extension Board in NI Measurement and Automation Explorer (MAX). How do I configure and use my I/O Extension ...

... Topic NI PCIe-1427 NI PCIe-1427 farbius Member ‎08-20-2015 ... got Ni PCie 1427 framegrabber and mdr 26 to sdr 26 cable. ... Re: NI PCIe-1427 nikale NI Employee (retired) ‎08-21-2015 ...

... troubleshooting PCIe-1427 troubleshooting PCIe-1427 Azi Member ... have a PCIe-1427 working on a Windows XP-32bit. We want ... using the PCIe-1427. However, when we install the board, ...