Filtered Results

The text files must be in the following format.parameter1 delimiter value1 parameter2 delimiter value2 ...The text file cannot contain any column headers. The following table describes valid entries for ...

These user interfaces, called screens, allow an operator to easily control and monitor specific channels within a system definition at run-time. A project is a collection of related screens. Use the following ...

Open VeriStand. Click Default Project. Enter a Project Name. Select a Location to save the project. Select a System Definition. If you do not have a system definition, leave this field as None chosen. ...

Open VeriStand. Create or open a VeriStand project. Click Configure... to open System Explorer. Click File New to open the New System Definition dialog box. Enter a System Definition name. Click OK. After ...

If a model takes a long time to execute, the PCL might run slower than the target rate or the model might not run on schedule during the next PCL iteration. If a system contains multiple models and you ...

Before you begin, create a real-time sequence with a channel reference. In the Stimulus Profile Editor, click the Start Page tab. Click New Real-Time Sequence. Save the sequence as Measure Set Preference ...

Before you begin, add a CAN port. You can replay the frames within the file in the same order and timing as they were initially received. You can also filter specific frames from the file. A data replay ...

In addition to creating cleaner parameter files, aliasing parameter names can extend the reusability of a test by allowing you to simply update the alias file if you want to use the same test on a model ...

Before you begin, import an incoming XNET frame. Frame information channels store incoming NI-XNET frame information. You can create the following types of Frame Information channels. Receive Time—Contains ...

Before you begin, create a model header file. Browse to \VeriStand\\ModelInterface\custom\examples, create a copy of template.c, and give the copy a new name. is the drive ...

Launch the VeriStand Editor. In the Project Files pane, double-click a system definition file (.nivssdf). System Explorer opens. Click Targets Controller Hardware Chassis NI-XNET in the configuration tree. ...

Open the Workspace. Select Screen Edit Mode to display the Workspace Controls palette and alignment grid. Click the Workspace Controls palette and drag a control or indicator onto the alignment grid. In ...

Launch the VeriStand Editor. In the Project Files pane, double-click a system definition file (.nivssdf). System Explorer opens. Click Targets Controller Hardware Chassis DAQ in the configuration tree. ...

Open a project in VeriStand. Depending on your hardware goal, complete any of the following tasks in System Explorer. Goal Task Adding and configuring an SLSC device Use SLSC devices to introduce signal ...

Before you begin, you must compile the model to use it. To learn more about models, refer to Components of a Model and Primary Control Loop Step Execution in Models. VeriStand executes each model in its ...

Launch the VeriStand Editor. In the Project Files pane, double-click a system definition file (.nivssdf). System Explorer opens. Click Targets Controller Procedures in the configuration tree. Click Add ...

You must add a timing and sync device to the Timing and Sync directory of VeriStand in order to add it to the system definition. VeriStand includes one example timing and sync device. You can add a timing ...

Expressions are the building blocks of real-time sequence code. Depending on your goal, complete the following tasks. Goal Tasks Create a new, empty expression Drag an Expression primitive from the Expressions ...

You can add an FPGA target and corresponding FPGA configuration file to a system definition file without installing the LabVIEW FPGA Module. However, you must install the LabVIEW FPGA Module to create ...

Launch the VeriStand Editor. In the Project Files pane, double-click a system definition file (.nivssdf). System Explorer opens. Click Targets Controller Hardware Chassis Data Sharing in the configuration ...

Before you begin, you need to create a new system definition file. Launch the VeriStand Editor. Click New Add File. In the Select Item window, select a system definition file (.nivssdf), and click Open. ...

Extend user channel functionality by mapping a channel to other channels. For example, use a single user channel to start multiple models simultaneously by mapping the user channel to the Model Command ...

Refer to the NI-XNET Hardware and Software Help for detailed information about NI-XNET databases. Launch the VeriStand Editor. In the Project Files pane, double-click a system definition file (.nivssdf). ...

Use these dialog boxes to perform operations such as monitoring alarms, viewing channel data, scaling and calibrating channels, or running stimulus profiles. Open the VeriStand Editor. In the Navigation ...

Depending on your goal, use an argument to send a command to the VeriStand Editor. Goal Argument Example Specify the VeriStand project to run. /nivsprj /nivsprj "\Examples\Stimulus Profile\Engine ...

Before you begin, you should familiarize yourself with the Stimulus Profile Editor environment. Real-time sequences deploy to the target and can deterministically execute. Sequences test the UUT by reading ...

Before you begin, you should familiarize yourself with the Stimulus Profile Editor environment. In real-time test, a stimulus is a physical or logical input that incites a reaction from the UUT. A typical ...

Before you begin, you should understand the VeriStand Engine and the PCL execution mode steps. Launch the VeriStand Editor. In the Project Files pane, double-click a system definition file (.nivssdf). ...

The default value of all inports is 0. Change the default if your model divides by an inport to avoid an invalid operation.Verify if your system configuration will cause the initial default value to go ...

Open the Workspace. Select Screen Edit Mode to display the Workspace Controls palette and alignment grid. Click the Workspace Controls palette. Select Model Calibration Control. Choose one of the following ...

Showing 1-30 of 353 results
1 of 12 pages