Filtered Results

The following figure shows the NI-5782 block diagram and signal flow. NI-5782 Connector Signals and NI-5782 CLIP Signal Block Diagram

This document lists specifications for the NI-5782. All specifications are subject to change without notice. The protection provided by the NI-5782 can be impaired if it is used in a manner not described ...

The NI-5782 clock source controls the sample rate and other timing functions on the device. The following table contains information about the possible NI-5782 clock sources. NI-5782 Clock Sources Clock ...

100 MHz bandwidth transceiver adapter module for FlexRIO. Dual 14-bit, 250 MS/s inputs Dual 16-bit, 500 MS/s real-time, 1 GS/s interpolated outputs 100 MHz real-time bandwidth per channel DC- and AC-coupled ...

NI-5782 Front Panel Connectors Device Front Panel Connector Signal Description AUX I/O Digital I/O and PFI connector CLK IN 50 Ω single-ended (SE) external Reference or Sample Clock input. TRIG Trigger ...

User Setting User Command User Data 0 Value User Data 1 Value User Return Value Clock Settings 0 0 = Internal Sample Clock 1 = Internal Sample Clock locked to an external Reference Clock through the CLK ...

User Setting User Command User Data 0 Value User Data 1 Value User Return Value Clock Settings 0 0 = Internal Sample Clock 1 = Internal Sample Clock locked to an external Reference Clock through the CLK ...

The NI-5782 ships with socketed CLIP items that add module I/O to the LabVIEW project. NI-5782 Multiple Sample CLIP The analog input channels generate two samples per clock cycle at a clock rate that is ...

Configure the DAC output at runtime by providing the appropriate User Data 1 value from the User Data Clock Settings table. Timebase Clock—The Timebase Clock is routed to the ADC and the DAC, and is used ...

CLIP Signal Name Data Type Control/Indicator Description CLK200 — — You must select a 200 MHz clock in the Clock Selections category of the IO Module Properties dialog box for proper CLIP functionality. ...

Configure the DAC output at runtime by providing the appropriate User Data 1 value from the User Data Clock Settings table. Timebase Clock—The Timebase Clock is routed to the ADC and the DAC, and is used ...

CLIP Signal Name Data Type Control/Indicator Description CLK200 — — You must select a 200 MHz clock in the Clock Selections category of the IO Module Properties dialog box for proper CLIP functionality. ...

Showing 1-12 of 12 results