Filtered Results

Access download and support information for NI-DAQmx Full, Runtime and Runtime with Configuration Support

I just purchased multiple NI hardware and software products. Is there a preference for the order of installation of NI software and hardware drivers? I need to install an older version of LabVIEW (or LabWindows™/CVI)on ...

For one of the below listed reasons, I would like to request/order the physical media (DVD or USB) for my NI software installation: I have alicense forNI software, such as NI DeveloperSuite or NI Software ...

This document is part of the Getting Started with NI-DAQmx Series. This article will walk-through how to create tasks usingsimulated or physical NI-DAQmx devices in NI Measurement and Automation Explorer ...

This document is part of the Getting Started with NI-DAQmx Series. This article will walk-through how to create tasks usingsimulated or physical NI-DAQmx devices in LabVIEW. In order to determine if your ...

If you want to understand functionality and test hardware capabilities without the hardware being physically present, a simulated NI-DAQmx device can replicate similar properties of the device. The purpose ...

I have a PXIe card which I need to start using an external hardware trigger. I am using a PXI Express Chassis with the Timing and Synchronization Option like a PXIe-1095 or PXIe-1092, which have 4 PFI ...

This document is part of the Getting Started with NI-DAQmx Series. This article withexplain and walk through how to create simulated NI-DAQmxdevices. If you want to understand functionality and test ...

This tutorial describes how to convert an existing NI-DAQmx shipping example into a LabVIEW project to be used with a cRIO-904x target. The shipping example we will be using is the Voltage - Continuous ...

I would like to learn about DAQmx and study how to program it by learning the examples. Where do I find these examples within LabVIEW?

Some of my NI software, toolkits or drivers are corrupt, broken, or not working as expected, and I want to try reinstalling to fix it. I might be seeing crashes or hangs in my software, or some driver ...

Is the NI-DAQmx driver compatible with the CompactRIO platform? I have some VIs written using NI-DAQmx that I would like to use on a CompactRIO, which model should I get?

I have a USB DAQ system from National Instruments and I want to: Acquire data from my hardware usingPython code to do data processing. Use the NI-DAQmx C functions in my Python application.

I am using a DAQ device to measure an analog signal. When I configure my device for the acquisition of my signal I must choose from a list of terminal configurations. What are those, and which one should ...

This document is part of the Getting Started with NI-DAQmx Series. This article withexplain and walk through how to create simulated NI-DAQmxdevices. If you want to understand functionality and test ...

How do I interface with the PFI0 on cRIO controllers with DAQmx (cRIO-904x and cRIO-905x) How do I synchronize FPGA acquisition with DAQmx acquisition? How can I send the PFI0 signal on mycRIO-904x or ...

I have a LabVIEW program to communicate to a DAQ device through DAQmx. Whenever I run it, I get the following error: What causes this error and how can I fix it?

How do I use the input and output terminals of my CompactRIO's modules? I have a CompactRIO and I want to use it to generate or acquire data from its C series modules? How do I get started with my cRIO ...

I use USB-6341 for testing a large number of resistors. And I need to analyse those data with SPC tools, like getting First Pass Yield (FPY) from test data. Is this kind of feature provided in LabVIEW? ...

I can set up a digital change detection task with the DAQmx API in LabVIEW, but I do not know how to handle the change detection event in software. What is the proper way to handle change detection events ...

My VI uses NI-DAQmx and I am getting the following error.How do I fix this error and get my data acquisition (DAQ) devices to show up in NI MAX? NILVAIU.dll failed to initialize or must reload dmf configurator ...

When is it appropriate to create and destroy tasks in the NI-DAQmx driver? What are the implications to memory of not destroying tasks after the acquisition is complete?

I would like to combine DAQmx tasks or acquire more than one channel from a single task. I am trying to simultaneously read or write signals on multiple channels using NI-DAQmx, and would like them synchronized ...

I am developing an application involving multi-channel inputs and I need to know exactly how each of the channels are sampled. Are they sampled one by one or all at the same time? Also, how can I change ...

NI Package Manager (NIPM) states that the NI-DAQmx driver is installed, but I am still missing DAQmx support in LabVIEW NXG. NXG seems to have been installed and starts up, but there are no device drivers ...

I am using NI software (like FlexLogger, DAQExpress, NI-DAQmx API in LabVIEW, etc.)to log data in a TDMS file format. How do I view the TDMS files?

I am using a NI X-series DAQ hardware, why do I get high output in the DIO lines during the computer powering up state or after computer is shut down. Can this be changed?

I am using an analog trigger to start an input acquisition on my NI 60xxE, 62xx or 63xx (formerly E, M, or X Series) device module. I set my trigger level to a certain voltage and notice that there is ...

I am performing an Analog Output Task and getting the following error message: Error -200294 occurred at DAQmx Start.vi Possible reason(s): Not enough samples were written to satisfy the initial data ...

Why do I get error -200019 when I increase the rate of my DAQmx task? My task will not run because of error -200019. I am using an external clock to sample an analog input. When I sample the data at a ...

Showing 1-30 of 320 results
1 of 11 pages