Filtered Results

The NI CompactRIO Controller combines a processor running NI Linux Real-Time, a programmable FPGA, and I/O with vision, motion, and display capabilities.

I am able to see my CompactRIO (cRIO) under Remote Systems in NI Measurement & Automation Explorer (MAX). However, when I expand Devices and Interfaces under the cRIO, I can't see my C Series I/O modules. ...

I have a CompactRIO (cRIO) set up such that some of my modules are utilizing Scan Mode and some of my modules have custom code written in an FPGA VI. My project looks similar to the one pictured below ...

Is the NI-DAQmx driver compatible with the CompactRIO platform? I have some VIs written using NI-DAQmx that I would like to use on a CompactRIO, which model should I get?

When I use Google Chrome, Mozilla Firefox, or Safari, I cannot access Remote Front Panels, NI Network Browser or the Web Interface (WIF). I get an error message similar to the following: This plugin is ...

This tutorial provides step-by-step instructions to help you set up your EtherCAT system using anEthernet CompactRIO Chassis and LabVIEW graphical programming. Follow these guidelines to go from unpacking ...

I have a Real-Time controller with two Ethernet ports. How do I configure the two ports, and what can I do with these two Ethernet ports? I have configured both Real-Time target's (PXIe and Ethernet cRIO) ...

I would like to use Direct Memory Access (DMA) to transfer data from my FPGA target to my host (or vice versa), but I am not sure how many DMA Channels or FIFOs are on my FPGA target. How can I find out ...

With its ability to interface with any kind of sensor or specialty I/O, perform advanced signal processing and custom analytics, and execute advanced control algorithms, the LabVIEW RIO architecture is ...

I am using C Series analog input modules with Delta-Sigma (DSA) and successive approximation register (SAR) ADC types with my cRIO. How can I synchronize these two types of modules together in FPGA?

I am trying to use the System Configuration API (or the Replication and Deployment (RAD) Utility) to clone my RIO system. After successfully using Create System Image. vi, I'm seeing the following error ...

How do I interface with the PFI0 on cRIO controllers with DAQmx (cRIO-904x and cRIO-905x) How do I synchronize FPGA acquisition with DAQmx acquisition? How can I send the PFI0 signal on mycRIO-904x or ...

I have a non-NI instrument that I would like to interface with my cRIO, which is running Linux. I would like to create a driver by modifying the kernel. Is the NI Linux Real-Time Kernel publicly available? ...

I am trying to log files to my cRIO-9033 (or other 903x) using FTP. When I log more than 32 files, I am getting an access violation or an error message telling me that the FTP has been aborted by the peer. ...

I am starting to use the LabVIEW Real-Time Module to program a CompactRIO. I have some existing .NET code that I would like to be able to use. Can I build my .NET code into a DLL and call it from my LabVIEW ...

I have a real-time VI running on a cRIO, and I am controlling it using the LabVIEW front panel on my PC. I want to be able to access the front panel from another computer without NI software installed ...

I am using the Sync model of CompactDAQ (cDAQ), CompactRIO (cRIO), or Industrial Controller and am utilizing Time Sensitive Networking (TSN). I need to purchase Ethernet switches that are TSN-compatible ...

I know how to use Measurement & Automation Explorer (MAX), Internet Explorer, Microsoft Windows Explorer or another FTP utility to send and receive files with my real-time target. Can this be done programmatically ...

I am using CompactRIO Scan Mode and need to programmatically set the shunt calibration of a channel. How can I do this?

Whenever I reboot my Real-Time controller, the executable runs automatically at startup. What methods can be used to remove the executable, or stop it from running automatically?

I need to upgrade software and deploy a new program on an NI controller, such as cRIO. The device is connected to another company's network which I do not have access to. Can I connect to the controller ...

This article explains how to download a bitfile to an FPGA target even without having the LabVIEW FPGA Module installed, by using Measurement and Automation Explorer (MAX).

After you've finished installing NI software on your CompactRIO controller, you need to detect your CompactRIO system using LabVIEW.

I am trying to communicate with my third party instrument. VISA Test Panels are working in NI MAX, but I get the following error when I use the VISA example VIs. -1073807246: The resource is valid, but ...

I use NI-TimeSync to have my CompactRIOs support IEEE 1588-2008 Precision Time Protocol synchronization. However,my ARM-based NI Linux Real-Time (Linux RT) device always acts as a PTP slave, even if there ...

I want to communicate with my Real-Time target with LabVIEW NXG: I have a Real-Time device running an application developed in LabVIEW, but I would like to use LabVIEW NXG to develop a user interface to ...

I want to use a Network Stream to transfer data from my Real-Time controller to a VI running on my host computer. When I run the VI, I get error -314000: LabVIEW cannot load the ni_nwstreams library. ...

I am attempting to set up my CompactRIO, sbRIO, or PXI controller as a Real-Time target. I can see my device in the NI Measurement & Automation Explorer (MAX) under Remote Devices. When I attempt to Add/Remove ...

When I click on the drop down menu of the VISA Resource constant in my LabVIEW application, why am I not able to see the VISA resources of my CompactRIO (cRIO) system?

Showing 1-30 of 213 results
1 of 8 pages