Filtered Results

The NI C Series Temperature Input Module takes measurements from thermocouples and resistance temperature detectors (RTDs) for CompactDAQ or CompactRIO systems.

NI C Series Temperature Input Modules measure signals from sensors such as thermocouples and resistance temperature detectors (RTDs).

I would like to connect Pt100 and Pt1000 temperature sensors to my analog and temperature input modules, but I don't know if the sensors are compatible with the specific modules.

I want to select between High Speed and High Resolution mode for my delta-sigma C Series device, such as an NI 9213 or 9219, in FlexLogger™ . How do I do this?

I am measuring low magnitude DC signals and am seeing noise from AC signals, such as 50 or 60 Hz power lines running in parallel to my signal wires. How can I filter out this noise? I am seeing 60Hz noise ...

I have an RTD and am using the conversion function in LabVIEW. When I use the Convert RTD Reading.vi, I do not get the values I am expecting. How can I get the right readings? I'm using an RTD to measure ...

The Operating Instructions for the NI 9216, NI 9217, NI 9226, and NI 9219 explain how to connect and measure from a 4-Wire RTD and 3-Wire RTD. Do these modules also support 2-Wire RTDs?

I'm looking at a module that has DSUB and spring terminal options with differing isolation voltages. Why are the isolation voltages different?

What is the temperature accuracy that I can expect from thermocouple sensors? I am reading the temperature of a chamber using two thermocouples of the same type but the readings are different. I have calculated ...

This document describes how to use the product in Zone 2 explosive atmospheres in China.

Calibration Procedure for the NI 9216 and NI 9226 C Series Temperature Input Modules.

These documents describe the memory volatility under normal use conditions for the NI 9216 and NI 9226.

This document provides specifications for the NI 9216.

This document explains how to connect the NI 9216.

This is the Letter of Volatility for the NI 9216/9226.

DATASHEET NI 9216 8 RTD, 0 Ω to 400 Ω, 24 Bit, 400 S/s Aggregate, PT100 • DSUB or push-in spring-terminal connectivity • 250 Vrms, CAT II, channel-to-earth isolation (spring terminal); 60 VDC, CAT I, channel-to-earth ...

This document introduces the available measurement platforms for RTD and Thermistor temperature sensors.

This document describes the range of software versions required for the aforementioned devices and links to the most recent documentation resources available at ni.com/manuals for each device. Note: Your ...

This page documents all the applicable standards and certifications for the NI-9216 and provides downloadable certifications.

This guide describes how to select a C Series cable or accessory that is compatible with your C Series Module. National Instruments provides over a hundred different C Series I/O models. This guide includes ...

Use this guide to match your C Series Modules with a D-Sub front connection with a compatible cable and accessory to meet the needs of your application, whether you are creating a new configuration, replacing ...

Use this guide to match your C Series Modules with spring terminal front connection with a compatible cable and accessory to meet the needs of your application, whether you are creating a new configuration, ...

This tutorial lists the C Series modules for the CompactDAQ product line and the CompactRIO product line. It does not include compatibility for CompactRIO Single Board (sbRIO) Controllers. For a list of ...

Showing 1-27 of 27 results