Filtered Results

This document lists specifications for the PXIe-6509 96-channel, 5 V TTL/CMOS, 24 mA PXI Digital I/O Module . Definitions Warranted specifications describe the performance of a model under stated operating ...

Use NI MAX, installed automatically with NI-DAQmx, to configure your NI hardware. Launch NI MAX. In the Configuration pane, double-click Devices and Interfaces to see the list of installed devices. The ...

NI-DAQmx includes example programs to help you get started developing an application. Modify example code and save it in an application, or use examples to develop a new application or add example code ...

(Optional) If you are using a MXI-Express connected chassis, turn off your computer. Note For more information about using MXI-Express chassis, refer to your chassis manual. Power off and unplug the PXI/PXI ...

Back up any applications before upgrading your software. You must be an Administrator to install NI software on your computer. Refer to the NI-DAQmx Readme on the software media for supported application ...

This document provides basic installation instructions for NI PXI and PXI Express DAQ modules. Refer to the documentation specific to your DAQ module for more information.

Complete the following steps to configure a measurement using the DAQ Assistant from NI MAX . In NI MAX, right-click Data Neighborhood and select Create New to open the DAQ Assistant. Select NI-DAQmx Task ...

Find the documentation for your DAQ device or accessory—including safety, environmental, and regulatory information documents—by going to ni.com/manuals and entering the model number. Find device terminal/pinout ...

The NI website is your complete resource for technical support. At ni.com/support , you have access to everything from troubleshooting and application development self-help resources to email and phone ...

Notice To prevent electrostatic discharge (ESD) from damaging the device, ground yourself using a grounding strap or by holding a grounded object, such as your computer chassis. Touch the antistatic package ...

Refer to the NI-DAQmx Help for additional information about using your DAQ product with the NI-DAQmx driver. To access the NI-DAQmx Help , launch NI MAX and go to Help » Help Topics » NI-DAQmx » NI-DAQmx ...

Skip to Content Bookmarks Watch List Search Preferences Log in PXIe-6509 Features 96-channel, 5 V TTL/CMOS, 24 mA PXI Digital I/O Module Device Pinouts Tags: Feature Usage PXIe-6509 class="topictitle1" ...

The following figure shows an example of signal connections for three typical digital I/O applications. Port 0 is configured for digital output, and port 7 is configured for digital input. Figure 5. PXIe-6509 ...

The following table lists the signal and descriptions for all signals available on the PXIe-6509 device. Table 1. PXIe-6509 Signal Descriptions Pin Signal Name Description MSB LSB 1, 3, 5, 7, 9, 11, 13, ...

The following sections provide examples of driving a relay with no more than 24 mA , driving a relay with more than 24 mA , and driving a solid-state relay (SSR). Parent topic: PXIe-6509

Note The PXIe-6509 can be configured for DI and DO on a line-by-line basis. The PXIe-6509 provides 96 lines of bi-directional DIO signals, P<0..11>.<0..7>. You can configure the PXIe-6509 for digital input ...

The watchdog timer is a software-configurable feature used to set critical outputs to safe states in the event of a software failure, a system crash, or any other loss of communication between the application ...

Pins 49 and 99 supply +5 V power to the I/O connector. The I/O connector power has a fuse for overcurrent protection. This fuse is not customer replaceable. If the fuse is blown, return the device to NI ...

Notice Operate this product only with shielded cables and accessories. Do not use unshielded cables or accessories unless they are installed in a shielded enclosure with properly designed and shielded ...

The following table shows a change detection example for six bits of one port. Table 3. Change Detection Example Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Changes to detect — —

Showing 1-20 of 45 results
1 of 3 pages