Filtered Results

Before installing your hardware, you must install the application software and instrument driver. Install the software in the following order: Install LabVIEW. Refer to the LabVIEW Installation Guide for ...

To use the PXIe-6593 , your system must meet certain requirements. For more information about minimum system requirements, recommended system, and supported application development environments (ADEs), ...

If an issue persists after you complete a troubleshooting procedure, search our KnowledgeBase for additional information our technical support engineers create as they answer common user questions and ...

Notice To prevent electrostatic discharge (ESD) from damaging the device, ground yourself using a grounding strap or by holding a grounded object, such as your computer chassis. Touch the antistatic package ...

The following items are included in the device kit: PXIe-6593 Documentation: PXIe-6593 Getting Started Guide (this document) PXIe-6593 Safety, Environmental, and Regulatory Information Parent topic: Getting ...

FlexRIO examples are available in LabVIEW's NI Example Finder. Complete the following steps to access the examples by task. In LabVIEW, click Help » Find Examples . In the NI Example Finder window that ...

Figure 1. FPGA Carrier Block Diagram Synchronization Gen3 x8 PCIe FPGA DRAM Bank 1 +12 V I/O Module Mezzanine Connector DIO Connector Flash Power Supplies +12 V, +3.3 V PXIe Backplane Module Clocking MGTs ...

The LabVIEW FPGA Module includes component-level intellectual property (CLIP) for HDL IP integration. FlexRIO devices support two types of CLIP: user-defined and socketed.

Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX informs other programs about which NI hardware products are in the system and how they are configured. MAX is automatically ...

Table 1. FlexRIO Documentation and Resources Document/Resource Location Description PXIe-6593 Getting Started Guide (this document) Available at ni.com/manuals . Contains installation instructions and ...

FlexRIO includes several example applications for LabVIEW. These examples serve as interactive tools, programming models, and as building blocks in your own applications. Parent topic: Getting Started ...

Figure 1. PXIe-6593 Front Panel PXIe-6593 FlexRIO Serial Digital DIO 16.3 Gbps REF/ CLK IN CLK OUT 4 Vpp MAX PORT 0 PORT 1 Connector Description Function DIO Molex Nano-Pitch DIO connector Multi-signal ...

This document explains how to install, configure, test, and use the PXIe-6593 . You can program the PXIe-6593 with the following software options. FlexRIO driver software NI LabVIEW Instrument Design Libraries ...

In the MAX configuration tree, expand Devices and Interfaces . Expand the Chassis tree to see the list of installed hardware, and press to refresh the list. If the module is still not listed, power ...

Notice To prevent damage to the PXIe-6593 caused by ESD or contamination, handle the module using the edges or the metal bracket. Ensure the AC power source is connected to the chassis before installing ...

Restart the system. Launch MAX, and perform the self-test again. Power off the chassis. Reinstall the failed module in a different slot. Power on the chassis. Perform the self-test again. Parent topic: ...

Visit ni.com/support to find support resources including documentation, downloads, and troubleshooting and application development self-help such as tutorials and examples. Visit ni.com/services to learn ...

Definitions Warranted specifications describe the performance of a model under stated operating conditions and are covered by the model warranty. Characteristics describe values that are relevant to the ...

This is the Letter of Volatility for the PXIe-6593.

Showing 1-20 of 32 results
1 of 2 pages