Filtered Results

The LEDs may not light until the module has been configured in MAX. Before proceeding, verify that the PXIe-5423 appears in MAX. If the ACCESS LED fails to light after you power on the chassis, a problem ...

Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX informs other programs about which NI hardware products are in the system and how they are configured. MAX is automatically ...

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...

Software is licensed pursuant to the software license agreements provided with the software or, in the absence of such license agreements, the NI Software License Agreement available at ni.com/legal at ...

Complete the following steps to generate a standard waveform or an arbitrary waveform using the NI-FGEN Soft Front Panel (SFP):

Launch LabVIEW. Select Help > Find Examples . Select Hardware Input and Output > Modular Instruments > NI-FGEN (Signal Generators) > Arbitrary Waveform Generation . Double-click an example to open it. ...

In the MAX configuration tree, expand Devices and Interfaces . Expand the Chassis tree to see the list of installed hardware, and press to refresh the list. If the module is still not listed, power ...

Caution To prevent damage to the PXIe-5423 caused by ESD or contamination, handle the module using the edges or the metal bracket. Ensure the AC power source is connected to the chassis before installing ...

You must be an Administrator to install NI software on your computer. Install an ADE, such as LabVIEW or LabWindows™/CVI™. Visit ni.com/downloads/drivers and search for NI-FGEN . Download the latest version ...

You can control your signal generator programmatically using the supplied PXIe-5423 Interchangeable Virtual Instrument (IVI) driver and an ADE.

Restart the system. Launch MAX, and perform the self-test or self-calibration again. Power off the chassis. Reinstall the failed module in a different slot. Power on the chassis. Perform the self-test ...

There are several required items not included in your PXIe-5423 kit that you need to operate the PXIe-5423. Your application may require additional items not included in your kit to install or operate ...

NI recommends using the SCB-19 connector block to connect digital signals to the AUX 0 connector on the PXIe-5423 front panel. Refer to the following figure and table for information about the SCB-19 signals ...

Front Panel Refer to the following figure and tables for information about the one- and two-channel PXIe-5423 front panel connectors and LEDs. PXIe- 5423 40 MHz 16-Bit AWG ACCESS ACTIVE CH 0 50 PFI 1 PFI ...

Ensure that the environment you are using the PXIe-5423 in meets the following specifications:

Self-calibration adjusts the PXIe-5423 for variations in the module environment using an onboard high-precision calibration ADC. Perform a complete self-calibration after the first time you install the ...

This document explains how to install, configure, test, and use the PXIe-5423. The PXIe-5423 ships with NI-FGEN driver software, which you can use to program the module.

Visit ni.com/support to find support resources including documentation, downloads, and troubleshooting and application development self-help such as tutorials and examples. Visit ni.com/services to learn ...

If an issue persists after you complete a troubleshooting procedure, contact NI technical support or visit ni.com/support.

Showing 1-20 of 61 results
1 of 4 pages