Filtered Results

The ISC-178x ships pre-loaded with the NI-supported Windows 10 distribution. Other versions and distributions of Windows are not supported. Complete this section if you are using the Windows version of ...

Remove the ISC-178x from the package and inspect the system for damage. Notify National Instruments if the system appears damaged in any way. Do not use a damaged system. Ensure that the AC input to the ...

Complete the following steps to supply power to the ISC-178x . Verify the power source is turned off. Connect and secure the M12 connector of the power supply cable to the Power and I/O connector on the ...

What to Use ISC-178x Smart Camera Development computer Ethernet switch or other network device Ethernet cable (one of the following): M12 to RJ45 Ethernet cable, NI part number 145230-05 M12 to M12 Ethernet ...

What to Use ISC-178x Smart Camera Development computer M12 to RJ45 Ethernet cable, NI part number 145230-05 What to Do Complete the following steps to connect the device directly to the development computer. ...

What to Use ISC-178x Smart Camera M12 to RJ45 Ethernet cable (5 m), NI part number 145230-05 Ethernet switch or other network device What to Do Complete the following steps to connect the device to a network. ...

Complete the following steps to connect the ISC-178x to the Power and I/O Accessory for ISC-178x Smart Cameras . Refer to the Power and I/O Accessory for ISC-178x Smart Cameras User Manual for more information. ...

The ISC-178x can connect to the development computer directly or through a network. Parent topic: Configuring the ISC-178x for NI Linux Real-Time

Connect the lens to the ISC-178x housing and screw it in firmly. Slide the lens cover over the lens and screw it into the ISC-178x housing until it is firmly in place. The lens cover must be in place for ...

The ISC-178x supports the following models of Varioptic liquid lenses. Caspian C-39N0-160-I2C Caspian C-39N0-250-I2C Complete the following steps to connect a Varioptic liquid lens to the ISC-178x . Disconnect ...

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...

You need the following hardware components to get started with the ISC-178x Smart Camera. ISC-178x Smart Camera ISC-178x Smart Camera lens Starter Kit for ISC-178x Smart Cameras, NI part number 785830-02 ...

Before using the ISC-178x , install other National Instruments software, such as application development environments, and then install the drivers onto the device. If you have an external USB DVD drive, ...

Before using the ISC-178x in environments other than Vision Builder AI, install the necessary drivers onto the device and the Windows development machine. Complete the following steps to install and configure ...

The ISC-178x indicates specific error conditions by flashing the Power, Status, and User LEDs. Table 4. LED Indications Power LED Status LED User LED Indication Off Off Off The ISC-178x does not have power. ...

1 2 3 4 5 6 7 8 9 10 11 12 Table 1. ISC-178x Power and I/O Connector Signal Descriptions Pin Signal Description 1 C OUT Common reference (negative) for isolated outputs 2 Analog Out Analog reference output ...

Caution The following paragraphs contain important safety information you must follow when installing and operating the device. Do not operate the device in a manner not specified in the documentation. ...

Caution Observe all instructions and cautions in the user documentation. Using the ISC-178x in a manner not specified can damage the model and compromise the built-in safety protection. Return damaged ...

The ISC-178x are high-performance smart cameras powered by a 1.58 GHz dual-core Intel Celeron processor. The combination of the onboard processor with a CMOS image sensor provides an easily distributed ...

Showing 1-20 of 72 results
1 of 4 pages