Filtered Results

This document lists the PXIe-8301 specifications Note Specifications are subject to change without notice. Caution Using the PXIe-8301 in a manner not described in this document can impair the protection ...

You can daisy-chain from a PXI Express chassis controlled by a laptop to an additional Thunderbolt 3 compatible device using MXI-Express Thunderbolt products. The following figure shows how you can use ...

Your MXI-Express Thunderbolt products are shipped in antistatic packages to prevent electrostatic discharge (ESD) to the devices. ESD can damage several components on the device. Caution Never touch the ...

Caution The protection provided by the MXI-Express Thunderbolt products can be impaired if it is used in a manner not described in this document. Parent topic: Introduction

The PXIe-8301 remote control module is compatible with host PCs that contain a Thunderbolt 3 port and are running a native (nonvirtualized) operating system that supports Thunderbolt connectivity. Note ...

This section explains how to unpack, install, and configure the MXI-Express Thunderbolt hardware and software. Parent topic: Introduction

Complete the following steps to install the PXIe-8301 in your PXI Express chassis. Power off your PXI Express chassis, but leave it plugged in while installing the PXIe-8301 . The power cord grounds the ...

This document provides installation, configuration, and reference information for the PXIe-8301 remote control module.

The tri-color PWR/LINK LED on the PXIe-8301 front panel gives status information about the power supply and link state, as the following table describes. Board LED Color Meaning PXIe-8301 (140652 x -01L) ...

Power up both the PXI Express chassis and the host PC. There are no requirements for how they are powered on. Observe the LED status on the PXIe-8301 where applicable. A properly connected and powered ...

This product meets the requirements of the following EMC standards for electrical equipment for measurement, control, and laboratory use: EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity EN ...

Dimensions 10.7 cm × 17.5 cm ( 4.4 in. × 6.9 in. ) Slot requirements One system slot (PXI Express) Compatibility Fully compatible with the PXI Express Hardware Specification , Revision 2.0, PICMG CompactPCI ...

Power Rail Typical Current Maximum Current +3.3 V 480 mA 600 mA +5 V 420 mA 500 mA +12 V 850 mA 4.2 A +5 V AUX 160 mA 200 mA Parent topic: PXIe-8301 Specifications

This product is designed to meet the requirements of the following standards of safety for information technology equipment: IEC 61010-1, EN 61010-1 UL 61010-1, CSA C22.2 No. 61010-1 Note For UL and other ...

MXI-Express Thunderbolt is based on PCI Express technology, using PCI Express switches and/or bridges to enable control of a PXI Express chassis from a host with an available Thunderbolt 3 port. This technology ...

Note Specifications are subject to change without notice. Caution Using the PXIe-8301 in a manner not described in this user manual can impair the protection the controller provides. Parent topic: Introduction ...

National Instruments recommends connecting the PXIe-8301 remote control module to a Thunderbolt 3 port on the host PC using a Thunderbolt 3 cable. Because Thunderbolt 3 is backwards-compatible with previous ...

The simplest MXI-Express Thunderbolt system consists of a PC connected to a PXIe-8301 in the controller slot of a PXI Express chassis, as shown in the following figure. Figure 2. Example of a Basic MXI-Express ...

The following table shows the various MXI-Express Thunderbolt cables available from National Instruments. Description Cable Length (Meters) Part Number MXI-Express Thunderbolt active cable 2 m 785607-02 ...

Showing 1-20 of 31 results
1 of 2 pages