Filtered Results

Some products are approved for marine (shipboard) applications. To verify marine approval certification for a product, visit ni.com/product-certifications , search by model number, and click the appropriate ...

The NI 9149 is suitable for use in Class I, Division 2, Groups A, B, C, D, T4 hazardous locations; Class I, Zone 2 , AEx nA IIC T4 Gc and Ex nA IIC T4 Gc hazardous locations; and nonhazardous

Caution Observe all instructions and cautions in the user documentation. Using the model in a manner not specified can damage the model and compromise the built-in safety protection. Return damaged models ...

The following table describes the STATUS LED indicators. Table 3. STATUS LED Indicators LED Pattern Indication Blinks twice and pauses The NI 9149 is in safe mode. Software is not installed, which is the ...

Complete the following steps to find the system in MAX. Launch MAX on the host computer. Expand Remote Systems in the configuration tree and locate your system. Select your target. Tip MAX lists the system ...

Add an exception for MAX to your network firewall or other security software by completing the following steps: On Windows 7, select Start » Control Panel » System and Security » Windows Firewall » Allow ...

You must connect the NI 9149 grounding terminal to the grounding electrode system of the facility. What to Use Ring lug Wire, 2.1 mm 2 ( 14 AWG ) or larger Screwdriver, Phillips #2 What to Do Complete ...

The NI 9149 has the following connectors, LEDs, and buttons. Parent topic: Overview Parent topic: GSG Purpose (cRIO/sbRIO)

Complete the following steps to connect the NI 9149 to the host computer using the USB device port. Power on the host computer. Connect the NI 9149 to the host computer using the USB A-to-B cable. Caution ...

The NI 9149 requires a 9 V to 30 V external power supply. The NI 9149 filters and regulates the supplied power and provides power for the C Series modules. The NI 9149 has one layer of reverse-voltage ...

Ensure that the USB connections between the NI 9149 and the host computer and the Ethernet connections between the host computer and the router are secure. Configure the IP and other network settings by ...

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...

The following figure shows the reset behavior of the NI 9149 . Figure 2. Reset Button Behavior Press and hold RESET button for ≥ 5 s Press and hold RESET button for < 5 s Run Mode Safe Mode Press

Notice To prevent electrostatic discharge (ESD) from damaging the device, ground yourself using a grounding strap or by holding a grounded object, such as your computer chassis. Touch the antistatic package ...

This document lists the specifications for the NI 9149 . The following specifications are typical for the -40 °C to 70 °C operating temperature range unless otherwise noted. Caution Do not operate the ...

Complete the following steps to install a C Series module. 2 2 3 1 Verify that power is not connected to the I/O connector(s) on the C Series module. If the system is in a nonhazardous location, the NI ...

Complete the following steps to install software on the NI 9149 . In MAX, expand your system under Remote Systems. Right-click Software . Select Add/Remove Software to launch the LabVIEW Real-Time Software ...

Before using the NI 9149 , you must install the following application software and device drivers on the host computer in this order: LabVIEW 2014 SP1 or later LabVIEW FPGA Module 2014 SP1 or later NI-RIO ...

Showing 1-20 of 94 results
1 of 5 pages