Filtered Results

Refer to the following table for the available NI 6587 CLIP items, and each CLIP item's function and available signals. Note All NI 6587 CLIP items allow individual clock output inversion. Table 4. NI ...

Maximum altitude 2,000 m (800 mbar) (at 25 °C ambient temperature) Pollution Degree 2 Indoor use only. Parent topic: NI 6587 Getting Started Guide

Before installing your hardware, you must install the application software and instrument driver. Visit ni.com/info and enter rdsoftwareversion as the Info Code to determine which minimum software versions ...

Ambient temperature range 0 °C to 55 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2 . Meets MIL-PRF-28800F Class 3 low temperature limit and MIL-PRF-28800F Class 2 high temperature limit. ...

To ensure specified EMC performance, PXI EMC filler panels must be properly installed in your NI FlexRIO system. The PXI EMC filler panels (National Instruments part number 778700-01) must be purchased ...

Note You must install the software before installing the hardware. Parent topic: NI 6587 Getting Started Guide

The NI 6587 provides one PFI signal and one clock signal through the two SMA connectors on the device front panel. The NI 6587 also provides the following signals on the Digital Data & Control (DDC) connector: ...

Note Before you begin, install and configure your chassis and controller. The NI 6587 is a FlexRIO adapter module (FAM) designed to work in conjunction with your NI FlexRIO™ FPGA module. This document ...

Ensure that the environment you are using the NI 6587 in meets the following specifications.

Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance information. To obtain product certifications and the DoC for this product, visit ni.com/certification , search ...

This product is designed to meet the requirements of the following electrical equipment safety standards for measurement, control, and laboratory use: IEC 61010-1, EN 61010-1 UL 61010-1, CSA 61010-1 Note ...

Operating shock 30 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC 60068-2-27 . Meets MIL-PRF-28800F Class 2 limits.) Random vibration Operating 5 Hz to 500 Hz , 0.3 g rms (Tested in accordance ...

Ambient temperature range -20 °C to 70 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2 . Meets MIL-PRF-28800F Class 3 limits.) Relative humidity range 5% to 95%, noncondensing (Tested in ...

The NI website is your complete resource for technical support. At ni.com/support , you have access to everything from troubleshooting and application development self-help resources to email and phone ...

Hot Surface If the module has been in use, it may exceed safe handling temperatures and cause burns. Allow the module to cool before removing it from the chassis. Caution Disconnect or disable any external ...

Caution To prevent ESD from damaging the devices, ground yourself using a grounding strap or by holding a grounded object, such as your computer chassis. Touch the antistatic package to a metal part of ...

To use the instrument driver, your system must meet certain requirements. For more information about minimum system requirements, recommended system, and supported application development environments ...

EU Customers At the end of the product life cycle, all NI products must be disposed of according to local laws and regulations. For more information about how to recycle NI products in your region, visit ...

Refer to the following figure for information about other product tasks and associated resources for those tasks. *This item is also installed with the driver software. EXPLORE LEARN CREATE DISCOVER Located ...

Showing 1-20 of 39 results
1 of 2 pages