Filtered Results

This document provides basic installation instructions for National Instruments bus-powered USB DAQ devices. Refer to the documentation specific to your DAQ device for more information. Unpacking the Kit ...

Definitions Warranted specifications describe the performance of a model under stated operating conditions and are covered by the model warranty. Characteristics describe values that are relevant to the ...

Skip to Content BookmarksWatch ListSearch PreferencesLog in USB-6501 Getting Started Guide • Last Updated: 2022-04-30 • Tags:  ○ Getting Started ○ USB-6501 This document explains how to install and configure ...

Skip to Content BookmarksWatch ListSearch PreferencesLog in USB-6000 Series Prototyping Accessory Assembly Instructions • Last Updated: 2022-04-30 • Tags:  ○ Getting Started ○ USB-6525 ○ USB-6501 ○ USB-600X ...

Before installing the NI USB-6501 , you must install the software you plan to use with it. Complete the following steps to set up the NI USB-6501 device: Install the combicon screw terminal blocks by inserting ...

The NI USB-6501 supplies a nominal 5 V from two pins, one on each screw terminal block. The voltage source is provided by the USB host. The voltage is nominally 5 V but varies from system to system. Refer ...

The NI-DAQmx Help contains API overviews and general information about measurement concepts. Select Start » All Programs » National Instruments » NI-DAQmx » NI-DAQmx Documentation . The NI-DAQmx C Reference ...

The NI USB-6501 Quick Start included with the NI USB-6501 describes how to install NI-DAQmx software, install the device, and confirm that your device is operating properly. The NI-DAQmx Readme is available ...

The following figure shows some common examples of connections of DIO lines with standard circuits. In the figure, P0.<0..7> is connected to example signals configured as digital inputs and digital outputs. ...

The NI USB-6501 device has 24 single-ended digital lines that comprise the three DIO ports: P0.<0..7>, P1.<0..7>, and P2.<0..7>. P2.7/PFI 0 can also function as a 32-bit event counter. Parent topic: Introduction ...

The following table shows the correlation between terminology used for hardware functionality and for NI-DAQmx. Table 3. Hardware and NI-DAQmx Terminology Hardware Functionality NI-DAQmx Terminology Open-drain ...

With the Microsoft .NET Framework version 2.0 or later, you can use NI-DAQmx to create applications using Visual C# and Visual Basic .NET without Measurement Studio. You need Microsoft Visual Studio .NET ...

You can configure P2.7/PFI 0 as the source for a 32-bit counter. In this mode, the device counts high to low transitions on P2.7/PFI 0. The counter can be armed and disarmed and the count can be read or ...

The NI-DAQmx and NI-DAQmx Base software includes examples you can use to get started programming with your device. Examples are also available from ni.com/support . Modify example code and save it in an ...

The NI USB-6501 features USB cable strain relief, an LED indicator, and two screw terminal connector plugs for I/O. Parent topic: Introduction

Each DIO signal is protected against overvoltage, undervoltage, and overcurrent conditions, as well as ESD events. However, you should avoid these fault conditions by using the following guidelines: If ...

The Data Acquisition section of the LabWindows/CVI Help contains Taking an NI-DAQmx Measurement in LabWindows/CVI , which includes step-by-step instructions for creating a measurement task using the DAQ ...

If you program your NI-DAQmx-supported device in Measurement Studio using Visual C# or Visual Basic .NET, you can interactively create channels and tasks by launching the DAQ Assistant from MAX or from ...

Software support for the NI USB-6501 is provided by NI-DAQmx or NI-DAQmx Base. Back up any applications before upgrading your software. You must be an administrator to install NI software on your computer. ...

The National Instruments USB-6501 is a Full Speed USB 2.0 device that provides 24 DIO channels and a 32-bit counter. This user guide describes how to use the device. For specifications, refer to the NI ...

Showing 1-20 of 43 results
1 of 3 pages