Filtered Results

You can generate signals interactively using the NI-RFSG Soft Front Panel (SFP), or you can use the NI-RFSG instrument driver to program your device in the supported ADE of your choice. Table 4. NI 5654 ...

Examples demonstrate the functionality of the device and serve as programming models and building blocks for your own applications. The NI Example Finder is a utility available for some ADEs that organizes ...

The National Instruments website is your complete resource for technical support. At ni.com/support , you have access to everything from troubleshooting and application development self-help resources ...

If an issue persists after you complete a troubleshooting procedure, contact NI technical support or visit ni.com/support.

Caution To prevent electrostatic discharge (ESD) from damaging the device, ground yourself using a grounding strap or by holding a grounded object, such as your computer chassis. Touch the antistatic package ...

Add a While Loop to continuously generate the signal and check the generation status until you click the Stop button.

Use Measurement & Automation Explorer (MAX) to configure your National Instruments hardware. MAX informs other programs about which devices reside in the system and how they are configured. MAX is automatically ...

The NI 5654 is a precision RF instrument that is sensitive to ESD and transients. Ensure you take the following precautions when making direct connections to the NI 5654 to avoid damaging the device.

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits are designed ...

The LEDs may not light until the device has been configured in MAX. Before proceeding, verify that the NI 5654 appears in MAX. If the ACCESS LED fails to light after you power on the chassis, a problem ...

In the MAX configuration tree, click Devices and Interfaces . Expand the Chassis tree to see the list of installed devices, and press to refresh the list. If the module is still not listed, power ...

Caution To prevent damage to the device caused by ESD or contamination, handle the device using the edges or the metal bracket. Ensure the AC power source is connected to the chassis before installing ...

You must be an Administrator to install NI software on your computer. Install an ADE, such as LabVIEW or LabWindows™/CVI™. Insert the driver software DVD into your computer. The installer should open automatically. ...

To use the NI 5654 with other devices, such as the NI 5696 AE , you must make connections using SMA cables. For best results when connecting signals to the NI 5654 front panel SMA connectors, use shielded ...

Showing 1-20 of 122 results
1 of 7 pages