Filtered Results
Clear All
How to Configure Motion Controller and Test a Stepper Motor

... PXI-7352 PXI-7354 PCI-7354 PCI-7356 PXI-7356 PCI-7358 ... PCI-7354, PXI-7354, PCI-7356, PXI-7356, PCI-7358, PXI-7358, ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000YIewCAG&l=en-US
Configuring Measurement and Automation Explorer (MAX) to Drive a Yaskawa Servo Motor Using a Digital Signal

... PXI-7352 PXI-7354 PXI-7356 PCI-7358 Software Measurement ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000019MZ5SAM&l=en-US
Stepper Motors Work in Open Loop Mode But Behave Incorrectly in Closed Loop Mode

... PCI-7354 PXI-7354 PCI-7356 PXI-7356 PCI-7358 PXI-7358 ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000004Am3SAE&l=en-US
Inaccurate Closed Loop Stepper Movement

... PXI-7352 PXI-7354 PXI-7358 Driver NI-Motion Issue Details ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000019LhSSAU&l=en-US
NI PCI- and PXI-735x Letter of Volatility

... later PXI-7354 190974G-06L or later PXI-7356 190974G-08L ...

https://www.ni.com/pdf/manuals/375919a.pdf
Obsolescence Planning for Several Legacy Product Families

... None (1) PXI-7354 None (1) PXI-7356 None (1) PXI-7358 ...

https://www.ni.com/en-us/support/documentation/supplemental/17/obsolescence-planning-for-several-legacy-product-families.html
Archived: NI Motion Controllers and Microsoft Windows Compatibility

This page shows supported versions of the NI Motion Controllers hardware driver with the Microsoft Windows operating system. Reference this information to ensure you install the correct version when upgrading ...

https://www.ni.com/en-us/support/documentation/compatibility/17/ni-motion-controllers-and-microsoft-windows-compatibility.html
PXI 7354

... Topic PXI 7354 PXI 7354 FRumd Member ‎06-02-2016 08:05 ... controller PXI-7354 in a PXIe-1062Q chassis with a PXIe-8108 ... for the PXI-7354 I have not been able to come to a clear ...

https://forums.ni.com/t5/Digital-I-O/PXI-7354/td-p/3303813
Breakpoint Pin Axis Assignments PXI 7354

... Assignments PXI 7354 Breakpoint Pin Axis Assignments PXI 7354 ... on the PXI-7354 / UMI 7774 combo with regards to Breakpoint ...

https://forums.ni.com/t5/Motion-Control-and-Motor-Drives/Breakpoint-Pin-Axis-Assignments-PXI-7354/td-p/3914498
Motion Assistant and PXI-7354 PWM output

... Assistant and PXI-7354 PWM output Motion Assistant and PXI-7354 ... have a PXI-7354 Motion Controller in a PXI-1033 rack ... Assistant and PXI-7354 PWM output Jochen Trusted Enthusiast ...

https://forums.ni.com/t5/Motion-Control-and-Motor-Drives/Motion-Assistant-and-PXI-7354-PWM-output/td-p/1150959
MID-7604

... using a PXI-7354 controller and MID-7604 driver to control ...

https://forums.ni.com/t5/Motion-Control-and-Motor-Drives/MID-7604/td-p/2670541
how to use the motor feedback

... I use pxi 7354 and umi 7774 to control the motors. ...

https://forums.ni.com/t5/Motion-Control-and-Motor-Drives/how-to-use-the-motor-feedback/td-p/593045
Failure to connect to a networked RT engine

... are a PXI-7354 motion controller card and a PXI-6040E ...

https://forums.ni.com/t5/PXI/Failure-to-connect-to-a-networked-RT-engine/td-p/130661
Solved: Problems with clearing the buffer for contoured motion; Errors -70061 and -70137

... using a PXI-7354 motion controller and running Labview ...

https://forums.ni.com/t5/Motion-Control-and-Motor-Drives/Problems-with-clearing-the-buffer-for-contoured-motion-Errors/td-p/2002845
Solved: homing using Find Reference giving me Modal errors

... an NI PXI-7354 Stepper/Servo controller controlling ...

https://forums.ni.com/t5/Motion-Control-and-Motor-Drives/homing-using-Find-Reference-giving-me-Modal-errors/td-p/3282256
3-D Models

... Contrl PXI-7354 P/N 778540-04 Controller P/N 778755-01 ...

https://forums.ni.com/t5/Motion-Control-and-Motor-Drives/3-D-Models/td-p/125843
PXI-7350 Controller and MID-7604 Power Drive

... order a PXI-7354.   Firstly, I will try to use the PXI-7352 ...

https://forums.ni.com/t5/Motion-Control-and-Motor-Drives/PXI-7350-Controller-and-MID-7604-Power-Drive/td-p/2663869
Solved: PID settings in MAX are labeled incorrectly

... using a NI PXI 7354 motion card, a UMI 7774, a servodrive ...

https://forums.ni.com/t5/Motion-Control-and-Motor-Drives/PID-settings-in-MAX-are-labeled-incorrectly/td-p/3578977
NI Motion Controllers and Drives compatibility with stepper motors

... with a PXI-7354 motion controller, and a UMI-7774 connector ...

https://forums.ni.com/t5/Motion-Control-and-Motor-Drives/NI-Motion-Controllers-and-Drives-compatibility-with-stepper/td-p/1817581
Solved: Is there a way to determine exactly where a breakpoint occurs?

... have a PXI-7354 that I am using to control a rotary ...

https://forums.ni.com/t5/Motion-Control-and-Motor-Drives/Is-there-a-way-to-determine-exactly-where-a-breakpoint-occurs/td-p/1866633
Showing 1-20 of 22 results
1 of 2 pages