Filtered Results

A DAQmx property node preselected to contain Device class properties. You can select other classes from the node on the diagram.

A DAQmx property node preselected to contain Timing class properties. You can select other classes from the node on the diagram.

A DAQmx property node preselected to contain Timing class properties. You can select other classes from the node on the diagram.

Use the DAQmx Physical Channel properties to query information about physical channels. Use the DAQmx Channel properties to configure virtual channels.

In physical channel names, cDAQ1Mod1 is the default device name for a C Series device plugged into a USB or Standalone NI CompactDAQ chassis, where cDAQ1 is the default chassis device name, and Mod1 refers ...

Digital I/O module capabilities depend on the type of digital signals that the module can measure or generate and the chassis the module is used in. The NI 9375, NI 9403, NI 9425, NI 9426, NI 9476, NI ...

In a typical control application, there are one or more process variables that you want to control, such as temperature. Sensors measure the process variable in the dynamic system and provide the data ...

For devices that support burst handshake timing, three signals are used: Pause Trigger (formerly called REQ) Ready for Transfer Event (formerly called ACK) sample clock For digital input tasks, when the ...

Adjusts the external calibration constant for the timebase of a DSA device with an adjustable oscillator. You must connect a sinusoidal signal with a known frequency to the device and specify that frequency ...

Creates channel(s) to measure voltage. Use this instance for custom sensors that require excitation. You can use the excitation to scale the measurement. You must configure the physical channel(s) with ...

Creates channel(s) to measure acceleration. Use this mode for custom sensors that require excitation. You can use the excitation to scale the measurement. LabVIEW NXG does not support FPGA devices Not ...

Adjusts the external calibration constants for an SCXI-1540 module. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Adjust SCXI 1540 Calibration.vi :/lvdaqmx.chm::/DAQmx ...

Adjusts the external calibration constants for an NI 9223 device. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Adjust 9223 Calibration.vi :/lvdaqmx.chm::/DAQmx ...

Creates channels to measure two-dimensional strain using a rosette strain gage. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AI-Strain-Rosette ...

Adjusts the external calibration constants for an NI 9239 device. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Adjust 9239 Calibration.vi :/lvdaqmx.chm::/DAQmx ...

Creates channel(s) to measure resistance. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AI-Resistance).vi :/lvdaqmx.chm::/DAQmx ...

Creates channel(s) to measure voltage. If the measurement requires the use of internal excitation or you need excitation to scale the voltage, use the Custom Voltage with Excitation measurement type for ...

Creates channel(s) that use a Wheatstone bridge to measure force or load. You must configure the physical channel(s) with TEDS information to use this VI. NI-DAQmx scales electrical values to physical ...

Showing 1-20 of 2087 results
1 of 105 pages