A DAQmx property node preselected to contain Timing class properties. You can select other classes from the node on the diagram.

A DAQmx property node preselected to contain Device class properties. You can select other classes from the node on the diagram.

A terminal is a named location where a signal is either generated (output or produced) or acquired (input or consumed). A terminal that can output only one signal is often named after that signal. A terminal ...

A DAQmx property node preselected to contain System class properties. You can select other classes from the node on the diagram.

Use the DAQmx Physical Channel properties to query information about physical channels. Use the DAQmx Channel properties to configure virtual channels.

Indicates whether the device supports hardware TEDS. Not supported Not supported in VIs that run in a web application 2FD6 attr2FD6.html

Indicates a list of all terminals on the device. Not supported Not supported in VIs that run in a web application 2A40 attr2A40.html

Indicates the list of input sources supported by the channel. Channels may support using the signal from the I/O connector or one of several calibration signals. Not supported Not supported in VIs that ...

Indicates the measurement types supported by the channel. Not supported Not supported in VIs that run in a web application Voltage 10322 Voltage measurement. Voltage RMS 10350 Voltage RMS measurement. ...

Specifies whether to turn on the sensor's power supply. Not supported Not supported in VIs that run in a web application 21D9 attr21D9.html