From 07:00 PM Friday, February 26 - 05:30 PM CST Saturday, February 27, ni.com will be undergoing system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Filtered Results

An analog multi edge trigger functions similar to an analog edge trigger. The analog multi edge trigger differs in that you can configure multiple channel sources acquiring in the same task to each have ...

For analog edge triggering, you configure the measurement device to look for a certain signal level and slope (either rising or falling). After the device identifies the trigger condition, the device performs ...

The following table lists the revised names for analog output terminal names. Original Terminal Names Revised Terminal Names Explanation DAC0OUT AO0 An analog output channel DAC1OUT AO1 An analog output ...

When you configure an Arm Start Trigger, a counter task does not respond to any Start Triggers until after the Arm Start Trigger occurs. You can configure this trigger to occur on a digital edge or at ...

A buffer is a temporary storage in computer memory for acquired or to-be-generated samples. Typically this storage is allocated from your computer's memory and is also called the task buffer. For input ...

Input Tasks If your acquisition is finite (sample mode on the Timing function/VI set to Finite Samples), NI-DAQmx allocates a buffer equal in size to the value of the samples per channel attribute/property. ...

You can specify the size of the buffer by calling the DAQmx Configure Buffer function/VI, by specifying the buffer size attribute/property in the buffer property node, or by writing a number of pulse specifications ...

For devices that support burst handshake timing, three signals are used: Pause Trigger (formerly called REQ) Ready for Transfer Event (formerly called ACK) sample clock For digital input tasks, when the ...

There are two types of calibration, channel calibration and device calibration.

You can configure a variety of triggers with pulse generations. All pulse generations support Start Triggers. Single pulse generation and finite pulse train generation also support the Retriggerable attribute/property, ...

Showing 1-10 of 879 results
1 of 88 pages