Filtered Results

I have a BNC-2121 breakout board connected to a PCIe-6612. I want to use it to receive a starting trigger and then output pulse signals (generated by the counters) on five lines. They pulse signals shall ...

I have a PCI(e) or PXI(e)66xx Counter/Timercard or a USB-6xxx Multifunction I/O with counter functionalityand I want to make sure the countersare working properly. How can I test mydeviceto see if it is ...

Can I read signals from multiple digital channels using one counter input task? Can I read from all the channels on my Digital or Counter DAQ module using one DAQmx Countertask?

To get the maximum bandwidth and data rate, in which slot should I connect PCIe 6612 on my computer mother board ? I understand that ideally this should be connected to x1 slot of the same generation. ...

I need to know the exact time it is taking to my scope to acquire data in my application. The acquisition time of my Scope/Digitizer is not what I expect, and it is taking too much to acquire the data. ...

This tutorial provides an example of how students can learn the fundamental theory behind digital logic counters and deploy these to hardware before the need to learn advanced hardware description languages ...

I am trying to set up a counter output task in my VeriStand project using an Counter/Timer Module card, but see error -307727 when I try to deploy the project. What is wrong with the timing source in my ...

This document explains how to install the application and NI-DAQmx driver software, set up your PCI/PCI Express DAQ device, confirm the device is operating properly, and take your first measurement.

This document lists specifications for the NI PCIe-6612/PXIe-6612 device. These specifications are typical at 25 °C unless otherwise noted. Refer to the NI 6612 User Manual for more information about the ...

Showing 1-10 of 22 results
1 of 3 pages