This page shows supported versions of the NI-DAQmx hardware driver with the Microsoft Windows operating system. Reference this information to ensure you install the correct version when upgrading or updating ...

This document contains information about calibrating National Instruments B, E, M, S, and X Series data acquisition (DAQ) devices, which include the following devices: NI 6010, NI 6013/6014/6015/6016, ...

This user manual contains information about using the National Instruments E Series data acquisition (DAQ) and Basic (B Series) Multifunction DAQ devices with NI-DAQ.

This document lists the I/O terminal summary and specifications for the devices that make up the NI 6030E/6031E/6032E/6033E family of devices.

This document contains instructions in English, French, German, Japanese, Korean, and Simplified Chinese. This document explains how to install the NI-DAQmx driver software, your data acquisition (DAQ) ...

The DAQ Getting Started Guide describes how to confirm your NI data acquisition (DAQ) device is operating properly using the Measurement & Automation Explorer (MAX), configuring a task using the DAQ Assistant, ...

NOTE TO USERS NI 60xx/60xxE Pinout Labels for the SCB-100 Multifunction I/O E Series Modules/Devices Using the 100-Pin Shielded Connector Block If you are using an NI 60xx/60xxE (formerly referred to as ...

This guide describes how to select an NI Data Acquisition (DAQ) cable or accessory that is compatible with your NI DAQ hardware. When working with NI Multifunction I/O (MIO) models such as 63xx, 62xx, ...

Signal Descriptions Signal Reference Description AI GND — Analog Input Ground—These terminals are the reference point for single-ended AI measurements in RSE mode and the bias current return point for ...