Filtered Results

Initiates an acquisition, waits for it to complete, and performs the specified waveform measurement for multiple channels and records. Not supported Not supported in VIs that run in a web application session ...

Initiates an acquisition, waits for it to complete, and retrieves the data for a single channel and record. Not supported Not supported in VIs that run in a web application session in Handle that identifies ...

Returns the waveform the digitizer acquires for the specified channel. This function initiates an acquisition that returns a scaled voltage waveform in a waveform data type that includes timing information. ...

Initiates an acquisition, waits for it to complete, and acquires data.

Performs a hard reset of the device. During a hard reset, acquisition stops, all routes are released, RTSI and PFI lines are tri-stated, FPGAs are reset, hardware is configured to its default state, and ...

Resets the oscillator to a known state and resets session attributes to values specified in the IVI configuration store. This function uses default parameters to perform a software reset on the device. ...

Resets the digitizer to its default state. Not supported Not supported in VIs that run in a web application session in Handle that identifies the NI-SCOPE instrument session as previously allocated by ...

Returns the revision numbers of the instrument driver and instrument firmware. Not supported Not supported in VIs that run in a web application session in Handle that identifies the NI-SCOPE instrument ...

Self-calibrates most NI digitizers, including all SMC-based devices and most Traditional NI-DAQ (Legacy) devices. Not supported Not supported in VIs that run in a web application Self-Calibrating SMC-Based ...

Runs the device self-test routine and returns the test result(s). Not supported Not supported in VIs that run in a web application session in Handle that identifies the NI-SCOPE instrument session as previously ...

Showing 1-10 of 128 results
1 of 13 pages