Filtered Results

Clock (G Dataflow) NI-SCOPE 17.0 NI-SCOPE 18.1 NI-SCOPE 18.5 NI-SCOPE 18.6 NI-SCOPE 18.7, 19.0 NI-SCOPE 19.1, 19.5, 19.6 NI-SCOPE 20.0, 20.1 Clock functions for NI-SCOPE. Adjust Sample Clock Relative Delay ...

For the NI 5900 differential amplifier, this function calibrates the gain and offset. Not supported Not supported in VIs that run in a web application session in The instrument handle that you obtain from ...

Externally calibrates the compensation attenuator. Not supported Not supported in VIs that run in a web application session in The instrument handle that you obtain from Start Calibration. The handle identifies ...

For NI 5105 digitizers, this function calibrates the external clock digital clock managers (DCMs). DCM calibration ensures that data can be sampled at the correct time in the clock period. Not supported ...

For the NI 5622, this function calibrates the frequency response of the device. The function is called multiple times, one for each frequency point in the sweep. The user must supply the stimulus frequency ...

Externally calibrates the vertical offset. Not supported Not supported in VIs that run in a web application session in The instrument handle that you obtain from Start Calibration. The handle identifies ...

Externally calibrates the vertical range for the specified channel and vertical range setting. Not supported Not supported in VIs that run in a web application session in The instrument handle that you ...

Configures the relative sample clock delay, in seconds, when using the internal clock. Each time this node is called, the Sample clock is delayed from the Reference clock by the specified amount of time. ...

For SMC-based devices, this function calibrates the sample rate of the digitizer. This function adjusts the frequency of the voltage controlled crystal oscillator (VCXO) that serves as the digitizer's ...

Automatically configures the digitizer. When you call this node, the digitizer senses the input signal and automatically configures many of the instrument settings. If a signal is detected on a channel, ...

Showing 1-10 of 121 results
1 of 13 pages