Filtered Results

Opens a session for the supported hardware you specify, sets initial values of certain properties for the session, and returns a reference that identifies the instrument in all subsequent NI-RFSG nodes. ...

Clears the data obtained from Self Calibrate Range. Not supported Not supported in VIs that run in a web application This node supports the following hardware: PXIe-5644/5645/5646 session in Instrument ...

Configures the NI-RFSG device to generate a continuous sine tone (CW), apply I/Q (vector) modulation to the RF output signal, or generate arbitrary waveforms according to scripts. The NI-RFSG device must ...

Creates a new configuration list step in the configuration list specified by the Active Configuration List property. When you create a configuration list step, a new instance of each property specified ...

Creates and initializes an NI-RFSG external calibration session. Not supported Not supported in VIs that run in a web application This node supports the following hardware: PXIe-5611 PXI/PXIe-5650/5651/5652, ...

Initiates signal generation, causing the NI-RFSG device to leave the Configuration state or Committed state and enter the Generation state. If settings have not been committed to the device before you ...

Forces a trigger to occur. The specified trigger generates regardless of whether the trigger has been configured as a software trigger. Not supported Not supported in VIs that run in a web application ...

Stops signal generation. Not supported Not supported in VIs that run in a web application This node supports the following hardware: PXIe-5611 PXIe-5644/5645/5646 PXI/PXIe-5650/5651/5652, PXIe-5653/5654/5654 ...

Allocates onboard memory space for the arbitrary waveform. Use this node to specify the total size of a waveform before writing the data. Use this node only if you are calling Write Arb Waveform multiple ...

Showing 1-10 of 91 results
1 of 10 pages