Filtered Results

Use the NI-FGEN nodes to develop applications for your NI waveform generator.

Returns the properties of the waveform generator that are related to creating arbitrary sequences. Not supported niFgen Query Arb Sequence Capabilities.vi :/nifgenlv.chm::/niFgen_Query_Arb_Sequence_Capabilities.html ...

Returns the properties of the waveform generator that are related to creating arbitrary waveforms. Not supported niFgen Query Arb Waveform Capabilities.vi :/nifgenlv.chm::/niFgen_Query_Arb_Waveform_Capabilities.html ...

Takes one or more voltage measurements from the onboard calibration ADC and returns their average value. The signal that the ADC actually measures can be specified using the Cal ADC Input property. The ...

Reads and returns the current onboard temperature of the waveform generator. Not supported niFgen Read Current Temperature.vi :/nifgenlv.chm::/niFgen_Read_Current_Temperature.html session in Handle ...

Performs a hard reset on the waveform generator. Generation is stopped, all routes are released, external bidirectional terminals are tri-stated, FPGAs are reset, hardware is configured to its default ...

Returns the revision numbers of the NI-FGEN software and the instrument firmware. Not supported niFgen Revision Query.vi :/nifgenlv.chm::/niFgen_Revision_Query.html session in Handle that identifies ...

Use the NI-FGEN script nodes to create, configure, and clear scripts.

Performs a full, internal self-calibration on the waveform generator. If the calibration is successful, new calibration data and constants are stored in the onboard EEPROM. Not supported This node does ...

Sends a command to trigger the waveform generator. This node can act as an override for an external edge trigger. Not supported niFgen Send Software Edge Trigger.vi :/nifgenlv.chm::/niFgen_Send_Software_Edge_Trigger.html ...

Showing 1-10 of 139 results
1 of 14 pages