Filtered Results

Writes a single 16-bit unsigned integer sample to a task that contains one or more digital output channels. Use an instance that writes 16-bit unsigned integers for devices with up to 16 lines per port. ...

Writes one or more 32-bit unsigned integer samples to a task that contains a single digital output channel. Use an instance that writes 32-bit unsigned integers for devices with up to 32 lines per port. ...

The following tables lists the default input terminals for various counter measurements. You can use a different PFI line for any of the input terminals. To change the PFI input for a measurement, use ...

In physical channel names, cDAQ1Mod1 is the default device name for a C Series device plugged into a USB or Standalone NI CompactDAQ chassis, where cDAQ1 is the default chassis device name, and Mod1 refers ...

This section contains information on counter signal connections and routing diagrams that illustrate the internal counter routing.

Configures the task to stop the acquisition when the device acquires all pretrigger samples; an analog signal enters or leaves a range you specify; and the device acquires all post-trigger samples. LabVIEW ...

Configures the task to stop the acquisition when the device acquires all pretrigger samples, detects a rising or falling edge of a digital signal, and acquires all posttrigger samples. LabVIEW NXG does ...

C Series devices can be grouped into scanned devices, slow sample devices, and delta-sigma devices based on acquisition behavior. This list does not include all C Series devices. C Series Scanned Devices ...

Specifies the temperature of a C Series device for the current external calibration session. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Set Temperature ...

Showing 1-10 of 879 results
1 of 88 pages