Filtered Results

Complete the following steps to install a C Series module. 2 2 3 1 Verify that power is not connected to the I/O connector(s) on the C Series module. If the system is in a nonhazardous location, the NI ...

Ensure that the environment in which you are using the NI 9149 meets the following specifications. Operating temperature (IEC 60068-2-1, IEC 60068-2-2) -40 °C to 70 °C Operating humidity (IEC 60068-2-78) ...

You must connect the NI 9149 grounding terminal to the grounding electrode system of the facility. What to Use Ring lug Wire, 2.1 mm 2 ( 14 AWG ) or larger Screwdriver, Phillips #2 What to Do Complete ...

Complete the following steps to install software on the NI 9149 . In MAX, expand your system under Remote Systems. Right-click Software . Select Add/Remove Software to launch the LabVIEW Real-Time Software ...

Some products are approved for marine (shipboard) applications. To verify marine approval certification for a product, visit ni.com/product-certifications , search by model number, and click the appropriate ...

When you power on the NI 9149 for the first time, the device boots into safe mode. The POWER LED illuminates, the STATUS LED illuminates briefly, and then the STATUS LED blinks twice every few seconds. ...

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...

Verify that power is not connected to the I/O connector(s) on the C Series module before you remove a module from the NI 9149 . If the system is in a nonhazardous location, the NI 9149 can be powered on ...

Caution Observe all instructions and cautions in the user documentation. Using the model in a manner not specified can damage the model and compromise the built-in safety protection. Return damaged models ...

Showing 1-10 of 98 results
1 of 10 pages