Filtered Results

Note You must install the software before you install the hardware. Power off and unplug the PXI Express chassis. Refer to your chassis manual to install or configure the chassis. Identify a supported ...

NI is committed to designing and manufacturing products in an environmentally responsible manner. NI recognizes that eliminating certain hazardous substances from our products is beneficial to the environment ...

Refer to the following table for the available NI 6587 CLIP items, and each CLIP item's function and available signals. Note All NI 6587 CLIP items allow individual clock output inversion. Table 4. NI ...

Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX informs other programs about which devices reside in the system and how they are configured. MAX is automatically installed ...

Before installing your hardware, you must install the application software and instrument driver. Visit ni.com/info and enter rdsoftwareversion as the Info Code to determine which minimum software versions ...

Ambient temperature range 0 °C to 55 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2 . Meets MIL-PRF-28800F Class 3 low temperature limit and MIL-PRF-28800F Class 2 high temperature limit. ...

Maximum altitude 2,000 m (800 mbar) (at 25 °C ambient temperature) Pollution Degree 2 Indoor use only. Parent topic: NI 6587 Getting Started Guide

The NI 6587 provides one PFI signal and one clock signal through the two SMA connectors on the device front panel. The NI 6587 also provides the following signals on the Digital Data & Control (DDC) connector: ...

Note Before you begin, install and configure your chassis and controller. The NI 6587 is a FlexRIO adapter module (FAM) designed to work in conjunction with your NI FlexRIO™ FPGA module. This document ...

Showing 1-10 of 42 results
1 of 5 pages