The following figure shows the reed relay lifetime nomograph. The purpose of this graph is to estimate reed relay lifetime.

SWB-2813 Pinout Type A AB1W0 50 AB0W0 49 AB0W1 1 AB1W1 2 AB3W0 52 AB2W0 51 AB2W1 3 AB3W1 4 — 54 — 53 — 5 — 6 — 56 — 55 — 7 — 8 C1W0 58 C0W0 57

NI switch modules are capable of switching one, two, and/or four wires.

Installing the NI SwitchBlock Refer to the NI Switches Getting Started Guide for information about installing an NI SwitchBlock carrier or card. Refer to the expansion bridge documentation for information ...

The NI SwitchBlock is a high-density, customizable, and expandable system that can operate within a PXI/PXI Express chassis and is composed of an NI SwitchBlock carrier that holds interconnectable NI SwitchBlock ...

Characteristic impedance is a transmission line parameter that determines how propagating signals are transmitted or reflected in the line.

A switch topology is an organizational representation of the channels and relays on a switch module.

Triggering support varies between swtich modules. To identify whether triggering is supported, search for the module to locate it in the sections below. If the module is not found, then it does not support ...

Initializing with Topology for NI SwitchBlock Devices Use the topology of the NI SwitchBlock device you created in MAX and one of the VIs or functions described in the following sections to initialize ...

Scanning is typically used when the timing of connections must be synchronized with an event from another device, such as a measurement device (hardware-timed scanning), or must be timed by software (software-timed ...