Filtered Results

C Series Modules COM Channel 0 Isolation NI 9997 Device Device Attach the C Series Modules COM to a terminal of the NI 9997 channel. Connect the common connection of the device(s) to the remaining terminals ...

This document explains how to connect to the NI 9997 . Note Before you begin, read the NI 9997 Safety, Environmental, and Regulatory Information document on ni.com/manuals and complete the software and ...

The following specifications are typical for the range -40 °C to 70 °C unless otherwise noted. Caution Do not operate the NI 9997 in a manner not specified in this document. Product misuse can result in ...

The NI 9997 simplifies wiring multiple shields to ground. TC+ TC- C Series Module or C Series Thermocouple TC+ TC- Ground Shield Shield Channel 0 Isolation NI 9997 Attach the ground of the separate C Series ...

Isolation External Power Supply + – Channel 0 NI 9997 Device 1 Device 4 Device 5 Device 2 Device 3 Channel 1 Connect the positive line of the PS to Channel 0 on the NI 9997 . Connect the negative

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...

The NI 9997 is suitable for use in Class I, Division 2, Groups A, B, C, D, T4 hazardous locations; Class I, Zone 2 , AEx nA IIC T4 Gc and Ex nA IIC T4 Gc hazardous locations; and nonhazardous

The NI 9997 has been evaluated as Ex nA IIC T4 Gc equipment under DEMKO 12 ATEX 1202658X and is IECEx UL 14.0089X certified. Each NI 9997 is marked II 3G and is suitable for use in Zone 2 hazardous

If hazardous voltages are connected to the product, take the following precautions. A hazardous voltage is a voltage greater than: 30 V RMS , 42.4 V peak , or 60 V DC in DRY LOCATIONS 16 V RMS , 22.6

If your application is subject to high vibration, NI recommends that you follow these guidelines to protect connections to the NI 9997:

Showing 1-10 of 20 results
1 of 2 pages