Filtered Results

The National Instruments website is your complete resource for technical support. At ni.com/support , you have access to everything from troubleshooting and application development self-help resources ...

Open Measurement & Automation Explorer (MAX). Expand the system under Remote Systems by clicking the arrow beside it. Select Software . Click Add/Remove Software at the top of the Software tab to launch ...

Caution To prevent electrostatic discharge (ESD) from damaging the device, ground yourself using a grounding strap or by holding a grounded object, such as your computer chassis. Touch the antistatic package ...

The NI-7931R shipping kit, which includes the following components: The NI-7931R device FlexRIO Support DVD Note FlexRIO Support 15.1 is the earliest supported driver for the NI-7931R . Power screw terminal ...

The NI-7931R requires a 9 V to 30 V external power supply that meets the specifications in the NI-7931R Specifications . The NI-7931R filters and regulates the supplied power and provides power for the ...

Refer to the following figure for information about other product tasks and associated resources for those tasks. Located using the NI Example Finder Located online at ni.com/manuals about the capabilities ...

Connect cables from your device to the host computer. If you are using the USB port, use a USB cable to connect the NI-7931R USB device port to a host computer. The USB driver creates a virtual network ...

The following figure shows the available signals on the NI-7931R . Bank 0 PCB Primary Side +3. 3 V SCL TB_Present +1 2 V V cc o RSVD GND IOModSyncClk_n IOModSyncClk GND GPIO_0_n GPIO_0 GND GPIO_1_n GPIO_1 ...

When you apply power for the first time to the NI-7931R , the controller boots into safe mode. The POWER LED illuminates, the STATUS LED illuminates briefly, and then the STATUS LED blinks twice every ...

Ensure that the environment you are using the NI-7931R in meets the following specifications.

Showing 1-10 of 39 results
1 of 4 pages