Filtered Results

Before proceeding, verify that the PXIe-4147 appears in MAX. If the ACCESS LED fails to light after you power on the chassis, a problem may exist with the chassis power rails, a hardware module, or the ...

Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX informs other programs about which NI hardware products are in the system and how they are configured. MAX is automatically ...

In the MAX configuration tree, expand Devices and Interfaces . Expand the Chassis tree to see the list of installed hardware, and press to refresh the list. If the module is still not listed, power ...

Notice To prevent damage to the PXIe-4147 caused by ESD or contamination, handle the module using the edges or the metal bracket. Ensure the AC power source is connected to the chassis before installing ...

You must be an Administrator to install NI software on your computer. Install an ADE, such as LabVIEW or LabWindows™/CVI™. Download the driver software installer from ni.com/downloads or install the driver ...

This document explains how to install, configure, and test the PXIe-4147 . The PXIe-4147 ships with NI-DCPower driver software, which you can use to program the module. Note Before you begin, install and ...

Restart the system. Launch MAX. Failed self-test Perform self-calibration, then perform the self-test again. The PXIe-4147 must be calibrated to pass the self-test. Failed self-calibration Perform self-calibration ...

There are several required items not included in your PXIe-4147 kit that you need to operate the PXIe-4147. Your application may require additional items not included in your kit to install or operate ...

A B PXIe- 4147 4-CH Precision SMU ALL CHANNEL SIGNALS ±8 V , 3 A MAX 60V MAX to OUTPUT 0 1 2 3 GUARD LO S LO GUARD HI S HI ACCESS VOLTAGE 1 2 3 4 5 6

Showing 1-10 of 57 results
1 of 6 pages