Filtered Results

Complete the following steps to set a system password. In MAX, click the Login button on the toolbar. Enter admin in the User name field. Leave the Password field blank. Note There is no default password ...

Complete the following steps to run a test panel in Measurement & Automation Explorer (MAX) to confirm that your cRIO-904x is communicating with your system.

Put the cRIO-904 x in safe mode and enable the RS-232 serial port by holding the RESET button down for 5 seconds. The STATUS LED starts blinking three times every few seconds. Use the RS-232 serial port ...

If you do not currently have any NI software installed on your host computer, see the Install Software section for details on required software and in which order to install it. If you have some NI software ...

Verify that the following items are included in the cRIO-904 x controller kit. Figure 1. cRIO-904 x Kit Contents 1 3 4 6 8 5 7 2 Controller (4-Slot or 8-Slot) USB Type-A Male to USB Type-C Male Cable Power ...

Add an exception for MAX to your network firewall or other security software by completing the following steps: On Windows 7, select Start » Control Panel » System and Security » Windows Firewall » Allow ...

The cRIO-904 x has the following connectors, LEDs, and buttons. For a full description of all front panel features, see the cRIO-904x User Manual . Figure 2. cRIO-904 x Front Panel 13 14 1 2 3 4 5 6 7

The cRIO-904 x requires a 9 V to 30 V external power supply. The cRIO-904 x filters and regulates the supplied power and provides power for the C Series modules. The cRIO-904 x has a primary power input, ...

Showing 1-10 of 248 results
1 of 25 pages