Filtered Results

The ISC-178x ships pre-loaded with the NI-supported Windows 10 distribution. Other versions and distributions of Windows are not supported. Complete this section if you are using the Windows version of ...

Remove the ISC-178x from the package and inspect the system for damage. Notify National Instruments if the system appears damaged in any way. Do not use a damaged system. Ensure that the AC input to the ...

Complete the following steps to supply power to the ISC-178x . Verify the power source is turned off. Connect and secure the M12 connector of the power supply cable to the Power and I/O connector on the ...

What to Use ISC-178x Smart Camera Development computer Ethernet switch or other network device Ethernet cable (one of the following): M12 to RJ45 Ethernet cable, NI part number 145230-05 M12 to M12 Ethernet ...

What to Use ISC-178x Smart Camera Development computer M12 to RJ45 Ethernet cable, NI part number 145230-05 What to Do Complete the following steps to connect the device directly to the development computer. ...

What to Use ISC-178x Smart Camera M12 to RJ45 Ethernet cable (5 m), NI part number 145230-05 Ethernet switch or other network device What to Do Complete the following steps to connect the device to a network. ...

Complete the following steps to connect the ISC-178x to the Power and I/O Accessory for ISC-178x Smart Cameras . Refer to the Power and I/O Accessory for ISC-178x Smart Cameras User Manual for more information. ...

The ISC-178x can connect to the development computer directly or through a network. Parent topic: Configuring the ISC-178x for NI Linux Real-Time

Connect the lens to the ISC-178x housing and screw it in firmly. Slide the lens cover over the lens and screw it into the ISC-178x housing until it is firmly in place. The lens cover must be in place for ...

Showing 1-10 of 72 results
1 of 8 pages