Filtered Results

Skip to Content Bookmarks Watch List Search Preferences Log in NI-9213 Getting Started 16-CH, ±78 mV, 24 Bit, 75 S/s Aggregate Where to Go Next Tags: Getting Started NI-9213 class="topictitle1" id="GUID-65318F5D-7AC8-48D5-BDFA-ABD454685F5F__GUID-57F5B3A6-9173-45EC-8EC3-B16A63F796D2">Where ...

The following specifications are typical for the range -40 °C to 70 °C unless otherwise noted. Caution Do not operate the NI-9213 in a manner not specified in this document. Product misuse can result in ...

Each channel passes through a differential filter and then is multiplexed and sampled by a 24-bit analog-to-digital converter (ADC). The channels share a common ground, COM, that is isolated from other ...

What to Use NI-9213 spring-terminal connector 0.08 mm 2 to 1.0 mm 2 ( 28 AWG to 18 AWG ) copper conductor wire with 7 mm ( 0.28 in. ) of insulation stripped from the end Flathead screwdriver with a

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...

The NI-9213 is suitable for use in Class I, Division 2, Groups A, B, C, D, T4 hazardous locations; Class I, Zone 2 , AEx nA IIC T4 Gc and Ex nA IIC T4 Gc hazardous locations; and nonhazardous locations ...

The NI 9213 has been evaluated as Ex nA IIC T4 Gc equipment under DEMKO 07 ATEX 0626664X and is IECEx UL 14.0089X certified. Each NI 9213 is marked II 3G and is suitable for use in Zone 2 hazardous

If hazardous voltages are connected to the product, take the following precautions. A hazardous voltage is a voltage greater than: 30 V RMS , 42.4 V peak , or 60 V DC in DRY LOCATIONS 16 V RMS , 22.6

If your application is subject to high vibration, NI recommends that you use the NI-9940 backshell kit to protect connections to the NI-9213 . Parent topic: Overview

Showing 1-10 of 30 results
1 of 3 pages