You must connect the NI 9149 grounding terminal to the grounding electrode system of the facility. What to Use Ring lug Wire, 2.1 mm 2 ( 14 AWG ) or larger Screwdriver, Phillips #2 What to Do Complete ...

The following figure shows the reset behavior of the NI 9149 . Figure 2. Reset Button Behavior Press and hold RESET button for ≥ 5 s Press and hold RESET button for < 5 s Run Mode Safe Mode Press

Put the NI 9149 in safe mode by holding the RESET button down for 5 seconds. The STATUS LED starts blinking three times every few seconds. Set a new DHCP connection by holding the RESET button down for ...

Verify that the following items are included in the NI 9149 kit. Parent topic: Overview Parent topic: GSG Purpose (cRIO/sbRIO)

APPLICATION SUPPORT NI Community ni.com/community NI CompactRIO Developer’s Guide ni.com/compactriodevguide Software Support ni.com/info swsupport Support ni.com/support SOFTWARE CompactRIO Sample Projects ...

This document lists the specifications for the NI 9149 . The following specifications are typical for the -40 °C to 70 °C operating temperature range unless otherwise noted. Caution Do not operate the ...

Add an exception for MAX to your network firewall or other security software by completing the following steps: On Windows 7, select Start » Control Panel » System and Security » Windows Firewall » Allow ...

The NI 9149 has the following connectors, LEDs, and buttons. Parent topic: Overview Parent topic: GSG Purpose (cRIO/sbRIO)

Complete the following steps to connect the NI 9149 to the host computer using the USB device port. Power on the host computer. Connect the NI 9149 to the host computer using the USB A-to-B cable. Caution ...

Ensure that the USB connections between the NI 9149 and the host computer and the Ethernet connections between the host computer and the router are secure. Configure the IP and other network settings by ...