If you're using NI-RFmx or NI-RFSA with LabVIEW or LabWindows/CVI , use the NI Example Finder to locate programming examples. Launch LabVIEW or LabWindows/CVI . Select Help > Find Examples to open the ...

If you're using NI-RFmx or NI-RFSA with Microsoft Visual C/C++, locate examples in the following directories.

Restart the system. Launch MAX, and perform the self-test again. Power off the chassis. Reinstall the failed module in a different slot. Power on the chassis. Perform the self-test again.

NI recommends you run the self-calibration from the NI-RFSA SFP. You can also run a self-calibration programmatically using the NI-RFSA API.

Ensure that the environment you are using the PXIe-5668 in meets the following specifications.

Figure 6. Installing the DC Block on the PXIe-5606 RF IN Connector 1 1 2 3 4 Screws DC block support DC block PXIe-5606 RF IN Connector Attach the DC block to the RF IN connector on the PXIe-5606 downconverter ...

If the IF digitizer module fails to phase-lock to the PXIe-5606 4 GHz LO2 OUT through the front panel, determine whether one of the following errors has occurred: Verify that the cable is not faulty and ...

These specifications apply to the PXIe-5668 (14 GHz) Vector Signal Analyzer and the PXIe-5668 (26.5 GHz) Vector Signal Analyzer with 320/765 MHz bandwidth, 200 MHz bandwidth, or 80 MHz bandwidth.

Figure 1. PXIe-5668 Kit Contents and Replacement Part Numbers 3 1 2 13 14 15 16 4 6 7 5 8 10 11 12 9 PXIe-5624 IF Digitizer Module PXIe-5606 RF Downconverter Module PXIe-5653 Synthesizer/LO Source Module ...

Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX informs other programs about which NI hardware products are in the system and how they are configured. MAX is automatically ...